EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 3.0

Fatigue and Rutting Analysis of Asphaltic Pavement Using “KENLAYER” Software

Touqeer Ali Rind, Ashfaque Ahmed Jhatial, Abdul Razzaque Sandhu, Imtiaz Ali Bhatti, Sajeel Ahmed

Journal of Applied Engineering Sciences · 01.12.2019 · 9 (2) · 177-182

DOI: 10.2478/jaes-2019-0024 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Engineering Sciences, online erschienen am 21.12.2019. Verfasst von Touqeer Ali Rind und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rutting and Fatigue are taken as main premature failures among all distresses, as these distresses have wide effect on performance of pavement. Sudden variation of heavy axle loaded vehicles, improper mix design and traditional design methodologies used in pavement design industries are major factors behind these failures. For proper performance and good serviceability, these premature distresses should be resisted. Thus, there is a need of using a Mechanistic based design methodology like KENPAVE software, so that traditional design errors should be overcome. KENLAYER is a part of KENPAVE software. KENLYER software tool is utilized to calculated accurately stresses and strains in asphaltic pavement that are ultimately used in calculating allowance for rutting and fatigue failure utilizing Asphalt Institute design models or formulas. Resistance to Rutting failure is checked by calculating vertical compressive stress at the top of soil sub-grade layer, while resistance to fatigue failure is checked by calculating horizontal tensile strain at the bottom of asphaltic layer using KENLAYER software tool. Thus, the object of this research study is to analyze a flexible pavement with respect to rutting and fatigue distresses using KENLAYER software tool. For achieving that objective NHA (N-55) section of road in Sehwan Pakistan was taken as a reference pavement. Pavement was analyzed by altering the thicknesses of bituminous courses by ± 25 percent. From that we obtained total 20 cross-sections to be analyzed using KENLAYER software in terms of Rutting and Fatigue premature failures.

Zitieren

APA

Rind, T. A., Jhatial, A. A., Sandhu, A. R., Bhatti, I. A., & Ahmed, S. (2019). Fatigue and Rutting Analysis of Asphaltic Pavement Using “KENLAYER” Software. Journal of Applied Engineering Sciences, 9(2), 177-182. https://doi.org/10.2478/jaes-2019-0024

Vancouver

Rind TA, Jhatial AA, Sandhu AR, Bhatti IA, Ahmed S. Fatigue and Rutting Analysis of Asphaltic Pavement Using “KENLAYER” Software. Journal of Applied Engineering Sciences. 2019;9(2):177-182. doi:10.2478/jaes-2019-0024

BibTeX
@article{Rind2019,
  author = {Rind, Touqeer Ali and Jhatial, Ashfaque Ahmed and Sandhu, Abdul Razzaque and Bhatti, Imtiaz Ali and Ahmed, Sajeel},
  title = {Fatigue and Rutting Analysis of Asphaltic Pavement Using “KENLAYER” Software},
  journal = {Journal of Applied Engineering Sciences},
  year = {2019},
  volume = {9},
  number = {2},
  pages = {177--182},
  doi = {10.2478/jaes-2019-0024}
}
Kostenlos starten →