Rapid Wind-load Prediction for a Standard Tall Building Using Physics-informed Deep Learning and CFD Surrogate Modelling
Civil and Environmental Engineering · 18.11.2026
DOI: 10.2478/cee-2027-0033 ↗Kurz gefasst
Fachartikel in der Zeitschrift Civil and Environmental Engineering, online erschienen am 18.11.2026. Verfasst von Hameed Shakir Al-Aasm. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
An accurate estimation of wind loads applied on tall buildings is still a challenge for civil engineers. Traditionally performed CFD simulations are computationally expensive enough to be unaffordable for use in the iterative process of design. A framework that exploits a physics-informed deep learning method is hereby proposed that performs fast wind pressure estimations for tall buildings. It will be demonstrated for one geometry through a proof-of-concept study of the CAARC standard tall building. The main principle relies on injecting information on the governing physical laws, in the shape of a physics-informed loss term, into a neural network for training. In this new learning model, the loss is made up by the Navier-Stokes equation itself and not solely on the numerical output of the CFD simulation to ensure physicsconsistent predictions during learning. An investigation scenario using the CAARC standard tall building as a case study is presented, and a physics-informed neural network trained on 11,520 points over several wind directions and with several turbulence models showed that the accuracy of prediction of the coefficient of determination (R) was 0.989, 0.986, 0.942 and 0.918 for pressure and U, V and W velocities, inference times below 0.01 s (4–5 orders of magnitude less than typical CFD simulations) and the result simultaneously incorporated both physically consistent predictions and conservation laws. For the test case presented, a Cd of 0.686 is estimated in line with values for the typical rectangular aerodynamic shape profile. It will be concluded that the proposed strategy would be very promising for estimating wind load on this CAARC building geometry but that future research is warranted for training PINNs that estimate wind load upon varying building geometries.
Zitieren
APA
Al-Aasm, H. S. (2026). Rapid Wind-load Prediction for a Standard Tall Building Using Physics-informed Deep Learning and CFD Surrogate Modelling. Civil and Environmental Engineering. https://doi.org/10.2478/cee-2027-0033
Vancouver
Al-Aasm HS. Rapid Wind-load Prediction for a Standard Tall Building Using Physics-informed Deep Learning and CFD Surrogate Modelling. Civil and Environmental Engineering. 2026. doi:10.2478/cee-2027-0033
BibTeX
@article{AlAasm2026,
author = {Al-Aasm, Hameed Shakir},
title = {Rapid Wind-load Prediction for a Standard Tall Building Using Physics-informed Deep Learning and CFD Surrogate Modelling},
journal = {Civil and Environmental Engineering},
year = {2026},
doi = {10.2478/cee-2027-0033}
}
EUVIMED