EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Mechanical Properties of Clay Brick by Using Stone Powder

Jwad K. Almusawi, Ahmed Hatif Obaid, Hayder Al-Khazraji, Sajid Kamil Zemam

Civil and Environmental Engineering · 01.06.2024 · 20 (1) · 481-490

DOI: 10.2478/cee-2024-0037 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Civil and Environmental Engineering, online erschienen am 26.06.2024. Verfasst von Jwad K. Almusawi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hundreds of studies have been written in the last several decades on the advantages of using stone powder as a raw material in the production of fired clay bricks. The durability and long-term behavior of the finished product, however, have received very little attention in the literature. Clay bricks are generally fired at high temperatures in developing countries, which reduces the mechanical performance of the bricks. This is especially evident in extreme environmental settings where weathering leads to significant damage. The evaluation of concrete waste (stone powder) used to make fired clay bricks is the main topic of this study. There are two sections: the first evaluates how adding stone powder to clay bricks improves their physical characteristics such absorption, efflorescence, density, and firing shrinkage. The impact of stone powder on the mechanical characteristics of specimens of burned clay bricks, such as compressive and flexural strengths, is covered in the second section. The percentages of stone powder in the clay bricks are 0 %, 5 %, 10 %, 15 %, and 20%. While the ratio of dry soil to water content remains is 0.3. In this work three fire phases are used untel to the maximum temperature is reached. The first one is 300 °C, the second phase is 600 °C, and 900 °C for the third phase. The water absorption of specimens decreased as the quantity of stone powder increased, and efflorescence also decreased, according to the results for the physical attributes. The density does, however, somewhat rise with the amount of stone powder. Additionally, when the amount of stone powder was increased, the experimental results indicated that firing shrinkage decreased. Mechanically considered, clay brick specimens with 20% more stone powder showed stronger compressive flexural capabilities.

Zitieren

APA

Almusawi, J. K., Obaid, A. H., Al-Khazraji, H., & Zemam, S. K. (2024). Enhancing Mechanical Properties of Clay Brick by Using Stone Powder. Civil and Environmental Engineering, 20(1), 481-490. https://doi.org/10.2478/cee-2024-0037

Vancouver

Almusawi JK, Obaid AH, Al-Khazraji H, Zemam SK. Enhancing Mechanical Properties of Clay Brick by Using Stone Powder. Civil and Environmental Engineering. 2024;20(1):481-490. doi:10.2478/cee-2024-0037

BibTeX
@article{Almusawi2024,
  author = {Almusawi, Jwad K. and Obaid, Ahmed Hatif and Al-Khazraji, Hayder and Zemam, Sajid Kamil},
  title = {Enhancing Mechanical Properties of Clay Brick by Using Stone Powder},
  journal = {Civil and Environmental Engineering},
  year = {2024},
  volume = {20},
  number = {1},
  pages = {481--490},
  doi = {10.2478/cee-2024-0037}
}
Kostenlos starten →