Development of a Transformer Model Using Optimization Method for Parameter Estimation
B&H Electrical Engineering · 15.07.2026
DOI: 10.2478/bhee-2026-0028 ↗Kurz gefasst
Fachartikel in der Zeitschrift B&H Electrical Engineering, online erschienen am 15.07.2026. Verfasst von Marina Pejić und 3 weiteren Autor:innen. Die Arbeit nennt 6 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The precise modeling of a transformer, including the estimation of its equivalent model parameters, is fundamental for power system analysis. Accurate determination of these parameters is required for both steady-state and transient studies, with particular attention to low-frequency transients such as transformer energisation. These phenomena are governed by the nonlinear characteristic of the transformer’s iron core, with the nonlinear saturation curve playing a key role in their behaviour and representing a major challenge in transformer modeling. This paper proposes an algorithm for the transformer’s nonlinear saturation characteristic estimation, based on measured inrush current waveforms. The method employs the Nelder–Mead optimization technique to minimize a defined objective function, ensuring minimal deviation between simulated and measured inrush currents with zero remanent flux. The validity of the proposed approach is demonstrated through a comparative analysis of measured and simulated inrush current waveforms.
Zitieren
APA
Pejić, M., Seme, S., Pušonjić, V., & Osmić, N. (2026). Development of a Transformer Model Using Optimization Method for Parameter Estimation. B&H Electrical Engineering. https://doi.org/10.2478/bhee-2026-0028
Vancouver
Pejić M, Seme S, Pušonjić V, Osmić N. Development of a Transformer Model Using Optimization Method for Parameter Estimation. B&H Electrical Engineering. 2026. doi:10.2478/bhee-2026-0028
BibTeX
@article{Peji2026,
author = {Pejić, Marina and Seme, Sebastijan and Pušonjić, Vensan and Osmić, Nedžad},
title = {Development of a Transformer Model Using Optimization Method for Parameter Estimation},
journal = {B&H Electrical Engineering},
year = {2026},
doi = {10.2478/bhee-2026-0028}
}
EUVIMED