EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 3.0

Modeling of A Two Stages Electrostatic Air Precipitation Process using Response Surface Modeling

Djelloul Berrached, Amar Tilmatine, Farid Miloua, Malika Bengrit

Archives of Electrical Engineering · 11.12.2014 · 63 (4) · 609-619

DOI: 10.2478/aee-2014-0042 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Electrical Engineering, erschienen am 11.12.2014. Verfasst von Djelloul Berrached und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Any industrial process needs to work with the optimal operating conditions and thus the evaluation of their robustness is a critical issue. A modeling of a laboratory-scale wire-to-plane two stages electrostatic precipitator for guiding the identification of the set point, is presented this in paper. The procedure consists of formulating recommendations regarding the choice of optimal values for electrostatic precipitation. A two-stages laboratory precipitator was used to carry out the experiments, with samples of wood particles of average granulometric size 10 µm. The parameters considered in the present study are the negative applied high voltage of the ionization stage, the positive voltage of the collection stage and the air speed. First, three “one-factor-at-a-time” experiments were performed followed by a factorial composite design experiments, based on a two-step strategy: 1) identify the domain of variation of the variables; 2) set point identification and optimization of the process.

Zitieren

APA

Berrached, D., Tilmatine, A., Miloua, F., & Bengrit, M. (2014). Modeling of A Two Stages Electrostatic Air Precipitation Process using Response Surface Modeling. Archives of Electrical Engineering, 63(4), 609-619. https://doi.org/10.2478/aee-2014-0042

Vancouver

Berrached D, Tilmatine A, Miloua F, Bengrit M. Modeling of A Two Stages Electrostatic Air Precipitation Process using Response Surface Modeling. Archives of Electrical Engineering. 2014;63(4):609-619. doi:10.2478/aee-2014-0042

BibTeX
@article{Berrached2014,
  author = {Berrached, Djelloul and Tilmatine, Amar and Miloua, Farid and Bengrit, Malika},
  title = {Modeling of A Two Stages Electrostatic Air Precipitation Process using Response Surface Modeling},
  journal = {Archives of Electrical Engineering},
  year = {2014},
  volume = {63},
  number = {4},
  pages = {609--619},
  doi = {10.2478/aee-2014-0042}
}
Kostenlos starten →