EUVIMEDEUVIMED entdecken
Crossref

Predictive Modelling of Time-Dependent Green Sand Moulding Parameters Using the Taguchi Method

Harshwardhan Chandrakant PANDIT, Arunkumar PADMAKUMAR, Anand DESHPANDE

Management and Production Engineering Review · 31.12.2025

DOI: 10.24425/mper.2025.157215 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Management and Production Engineering Review, online erschienen am 31.12.2025. Verfasst von Harshwardhan Chandrakant PANDIT und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Green sand mould quality plays a pivotal role in casting reliability and dimensional accuracy, yet mould properties degrade over time due to environmental exposure and production delays. This study examines the time-dependent behaviour of critical mould characteristics – green compressive strength (GCS), mould hardness, and permeability – under varying process conditions. Using a Taguchi L27 orthogonal array, the effects of moisture content, ramming time, and holding time were systematically evaluated across 27 experimental setups, with sequential moulding under realistic foundry conditions. Regression models were developed to predict property degradation based on mould age, which is defined as the cumulative moulding and holding time. Results highlight that optimal property retention occurs at moderate ramming times, higher moisture content, and shorter holding periods. Case 2 (4% moisture, 5-second ramming, 10-minute holding) demonstrated the most favourable balance of strength, hardness, and gas permeability. The predictive models exhibited high accuracy (R2 > 0.94), supporting their data-driven mould quality control application. These findings offer practical insights to improve maintainability, reduce casting defects, and enhance process reliability in sand casting operations. The research contributes to the broader goals of sustainable manufacturing and production system optimisation through statistically guided process management.

Zitieren

APA

PANDIT, H. C., PADMAKUMAR, A., & DESHPANDE, A. (2025). Predictive Modelling of Time-Dependent Green Sand Moulding Parameters Using the Taguchi Method. Management and Production Engineering Review. https://doi.org/10.24425/mper.2025.157215

Vancouver

PANDIT HC, PADMAKUMAR A, DESHPANDE A. Predictive Modelling of Time-Dependent Green Sand Moulding Parameters Using the Taguchi Method. Management and Production Engineering Review. 2025. doi:10.24425/mper.2025.157215

BibTeX
@article{PANDIT2025,
  author = {PANDIT, Harshwardhan Chandrakant and PADMAKUMAR, Arunkumar and DESHPANDE, Anand},
  title = {Predictive Modelling of Time-Dependent Green Sand Moulding Parameters Using the Taguchi Method},
  journal = {Management and Production Engineering Review},
  year = {2025},
  doi = {10.24425/mper.2025.157215}
}
Kostenlos starten →