EUVIMEDEUVIMED entdecken
Open Access · CC BY-ND 4.0

Study of the photopolymerization process of luminescent-labeled photocurable compositions in liquid and gas media

Małgorzata Noworyta, Maciej Pilch, Dawid Kiesiewicz, Renata Kłaput, Joanna Ortyl

Chemical and Process Engineering: New Frontiers · 21.07.2026 · 47 (2) · e131

DOI: 10.24425/cpe.2026.158129 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemical and Process Engineering: New Frontiers, online erschienen am 21.07.2026. Verfasst von Małgorzata Noworyta und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although photocurable compositions are widely used in 3D printing, protective coatings and biomedical materials, their polymerization in oxygen-containing environments is strongly hindered by oxygen inhibition, which prolongs the reaction time and reduces the conversion rate of monomers. This study investigated the effect of the reaction environment (argon atmosphere and liquid media: distilled water and CuSO4 solutions) on the kinetics of free-radical photopolymerization of four acrylic compositions (Bis GMA with TMPTA or EBECRYL 45, 130, 3300 oligomers). The kinetics were monitored using Fluorescence Probe Technology (FPT) with a coumarin 102 fluorescence probe and photorheology under 365 nm UV-LED irradiation. The results showed that in an argon atmosphere, oxygen inhibition is eliminated, resulting in the shortest induction times. In liquid environments, induction times are longer, but initial polymerization rates are higher than in the gas phase due to multiple reflections of UV radiation and a higher effective dose. The addition of Cu2+ ions partially suppresses this effect by absorbing light. The work provides new data on the design of photopolymerizable systems with increased oxygen resistance, which is important for applications in VPP photopolymerization 3D printing.

Zitieren

APA

Noworyta, M., Pilch, M., Kiesiewicz, D., Kłaput, R., & Ortyl, J. (2026). Study of the photopolymerization process of luminescent-labeled photocurable compositions in liquid and gas media. Chemical and Process Engineering: New Frontiers, 47(2), e131. https://doi.org/10.24425/cpe.2026.158129

Vancouver

Noworyta M, Pilch M, Kiesiewicz D, Kłaput R, Ortyl J. Study of the photopolymerization process of luminescent-labeled photocurable compositions in liquid and gas media. Chemical and Process Engineering: New Frontiers. 2026;47(2):e131. doi:10.24425/cpe.2026.158129

BibTeX
@article{Noworyta2026,
  author = {Noworyta, Małgorzata and Pilch, Maciej and Kiesiewicz, Dawid and Kłaput, Renata and Ortyl, Joanna},
  title = {Study of the photopolymerization process of luminescent-labeled photocurable compositions in liquid and gas media},
  journal = {Chemical and Process Engineering: New Frontiers},
  year = {2026},
  volume = {47},
  number = {2},
  pages = {e131},
  doi = {10.24425/cpe.2026.158129}
}
Kostenlos starten →