EUVIMEDEUVIMED entdecken
Crossref

Influence of liquid density and viscosity differences on the development of liquid–liquid interfacial area in hydrodynamic focusing

Antoni Rożeń

Chemical and Process Engineering: New Frontiers · 30.03.2026 · 125-125

DOI: 10.24425/cpe.2026.158123 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemical and Process Engineering: New Frontiers, online erschienen am 30.03.2026. Verfasst von Antoni Rożeń.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of the contact surface between mixed liquids and the reduction of striation thickness and filament diameters of the dispersed phase enable effective diffusive transport of components under stable laminar flow conditions. Hydrodynamic focusing accomplishes this at the initial mixing stage by generating viscous stresses tangential to the liquid–liquid interface and normal stresses associated with pressure. As a result, the additive stream forms either an elongated filament (3D focusing) or a thin striation (2D focusing). This work examines the influence of the physical properties of liquids and the focusing method on the intermaterial surface area concentration in vertical flow systems, where gravitational segregation is avoided. The Navier–Stokes equations were solved for the axisymmetric core–ring flow in a pipe and the stratified symmetric flow in rectangular channels of different aspect ratios. The effects of differences in liquid density and viscosity, as well as the axial pressure gradient, on the transverse size of the focused stream and the contact surface concentration were determined for both upward and downward flow. In addition, the influence of the rectangular channel geometry on the residence-time distribution of the additive liquid was analysed.

Zitieren

APA

Rożeń, A. (2026). Influence of liquid density and viscosity differences on the development of liquid–liquid interfacial area in hydrodynamic focusing. Chemical and Process Engineering: New Frontiers, 125-125. https://doi.org/10.24425/cpe.2026.158123

Vancouver

Rożeń A. Influence of liquid density and viscosity differences on the development of liquid–liquid interfacial area in hydrodynamic focusing. Chemical and Process Engineering: New Frontiers. 2026:125-125. doi:10.24425/cpe.2026.158123

BibTeX
@article{Roe2026,
  author = {Rożeń, Antoni},
  title = {Influence of liquid density and viscosity differences on the development of liquid–liquid interfacial area in hydrodynamic focusing},
  journal = {Chemical and Process Engineering: New Frontiers},
  year = {2026},
  pages = {125--125},
  doi = {10.24425/cpe.2026.158123}
}
Kostenlos starten →