EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

DC-DC high step-down split converters with low inductor current and low voltage stress – results for GaN-based design

Robert Stala, Zbigniew Waradzyn, Wojciech Kaliciński, Szymon Folmer, Krishna Kumar Gupta, Pallavee Bhatnagar, Andrzej Mondzik, Stanisław Piróg

Bulletin of the Polish Academy of Sciences Technical Sciences · 03.11.2026 · 74 (6) · 5998

DOI: 10.24425/bpasts.2026.5998 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bulletin of the Polish Academy of Sciences Technical Sciences, online erschienen am 03.11.2026. Verfasst von Robert Stala und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a concept of a DC-DC dual split buck converter with divided input voltage and a structure using two DC-DC switch-mode converters that supply the output capacitor in parallel. All components in the converter have reduced voltage stress, and the average current value of their inductors is reduced by about twofold compared to that of a buck converter. In the demonstrated implementation with GaN transistors, the converter achieved an efficiency higher than that of the buck converter, and its power range is also larger. The paper also proposes a solution where, at the output of the converter, there is a stack of capacitors with various connection configurations with the converter modules and load. Depending on the configuration, we achieve output current ripple cancelation, a further reduction by half in the average value of the inductor current, and a larger voltage control range. In addition, the converter operates with low voltage stress and has more than one output. An integral part of the converter in this configuration is an output balancing circuit. In the proposed implementation, this is a resonant switched-capacitor (SC) ladder converter based on low-voltage transistors of low resistance. This article contains results of experimental research on both types of converters based on GaN transistors with 400 kHz output current ripple and balancing circuit operation.

Zitieren

APA

Stala, R., Waradzyn, Z., Kaliciński, W., Folmer, S., Gupta, K. K., Bhatnagar, P., Mondzik, A., & Piróg, S. (2026). DC-DC high step-down split converters with low inductor current and low voltage stress – results for GaN-based design. Bulletin of the Polish Academy of Sciences Technical Sciences, 74(6), 5998. https://doi.org/10.24425/bpasts.2026.5998

Vancouver

Stala R, Waradzyn Z, Kaliciński W, Folmer S, Gupta KK, Bhatnagar P, et al. DC-DC high step-down split converters with low inductor current and low voltage stress – results for GaN-based design. Bulletin of the Polish Academy of Sciences Technical Sciences. 2026;74(6):5998. doi:10.24425/bpasts.2026.5998

BibTeX
@article{Stala2026,
  author = {Stala, Robert and Waradzyn, Zbigniew and Kaliciński, Wojciech and Folmer, Szymon and Gupta, Krishna Kumar and Bhatnagar, Pallavee and Mondzik, Andrzej and Piróg, Stanisław},
  title = {DC-DC high step-down split converters with low inductor current and low voltage stress – results for GaN-based design},
  journal = {Bulletin of the Polish Academy of Sciences Technical Sciences},
  year = {2026},
  volume = {74},
  number = {6},
  pages = {5998},
  doi = {10.24425/bpasts.2026.5998}
}
Kostenlos starten →