EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Production and characterisation of pyrolysis oil from discarded medical plastic (syringe) waste with common rail direct injection engine assessment

Rajkumar Thamizhvel, Natarajan Vaithianathan, Narayanan Sethuraman, Subramanian Vinodraj, Lenin Ambetharasu, Lenin Ambetharasu, Palani Surendar

Archives of Thermodynamics · 24.07.2026 · 47 (2) · 201-210

DOI: 10.24425/ather.2026.158687 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Thermodynamics, online erschienen am 24.07.2026. Verfasst von Rajkumar Thamizhvel und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the potential of converting syringe plastic waste into an alternative fuel through pyrolysis. Since sy-ringes are primarily made of polypropylene, they were thermally decomposed in a batch reactor, producing a maximum pyrolysis oil yield of 76% at 400–500°C. The produced syringe plastic oil (SPO) was characterised for key fuel properties and blended with diesel at 20%, 30%, and 40% proportions. The performance of the engine and the emission characteristics of these blends were tested experimentally on a common rail direct injection diesel engine. Of the fuels tested, the D80SPO20 mixture proved to be as efficient as diesel with the brake thermal efficiency of 26.9% and brake specific fuel consumption of 0.27 kg/kWh at full load. This mixture was also found to result in a significant reduction in carbon mon-oxide, hydrocarbons and smoke emission with a slight increment in NOx relative to diesel. On the whole, the findings show that low-percentage SPO30, especially D80SPO20, provide a favourable combination between engine efficiency and emis-sion reduction, proving the potential of the syringe plastic pyrolysis oil as a sustainable alternative of diesel fuel in part.

Zitieren

APA

Thamizhvel, R., Vaithianathan, N., Sethuraman, N., Vinodraj, S., Ambetharasu, L., Ambetharasu, L., & Surendar, P. (2026). Production and characterisation of pyrolysis oil from discarded medical plastic (syringe) waste with common rail direct injection engine assessment. Archives of Thermodynamics, 47(2), 201-210. https://doi.org/10.24425/ather.2026.158687

Vancouver

Thamizhvel R, Vaithianathan N, Sethuraman N, Vinodraj S, Ambetharasu L, Ambetharasu L, et al. Production and characterisation of pyrolysis oil from discarded medical plastic (syringe) waste with common rail direct injection engine assessment. Archives of Thermodynamics. 2026;47(2):201-210. doi:10.24425/ather.2026.158687

BibTeX
@article{Thamizhvel2026,
  author = {Thamizhvel, Rajkumar and Vaithianathan, Natarajan and Sethuraman, Narayanan and Vinodraj, Subramanian and Ambetharasu, Lenin and Ambetharasu, Lenin and Surendar, Palani},
  title = {Production and characterisation of pyrolysis oil from discarded medical plastic (syringe) waste with common rail direct injection engine assessment},
  journal = {Archives of Thermodynamics},
  year = {2026},
  volume = {47},
  number = {2},
  pages = {201--210},
  doi = {10.24425/ather.2026.158687}
}
Kostenlos starten →