Investigation of Heat Transfer and Flow Characteristics in Solar Air Heaters with a Spherical Turbulator Using Machine Learning Models
Archives of Thermodynamics · 24.07.2026 · 47 (2) · 99-118
DOI: 10.24425/ather.2026.158677 ↗Kurz gefasst
Fachartikel in der Zeitschrift Archives of Thermodynamics, online erschienen am 24.07.2026. Verfasst von Vijay Singh Bisht und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Solar air heaters are attractive for low-carbon thermal applications, but their performance is constrained by weak convective heat transfer in the near-wall region. In this work, a single-pass rectangular solar air heater duct equipped with spherical turbulators is investigated numerically and then accelerated using machine-learning surrogate models for rapid prediction of thermal–hydraulic responses. Five turbulator arrangements (V-, M-, W-shaped, inclined, and arc-shaped) were evaluated at three discrete spacing levels (pitch ratio P/D = 3, 6, 9) with a constant sphere diameter of 25 mm over Re = 3500–23 500, consistent throughout all the simulations. The computational fluid dynamics model employed a constant heat flux of 1000 W/m² and standard pressure–velocity coupling/discretisation practices, and was validated against established previous work. A leakage-safe machine-learning dataset (675 samples, 36 variables) was constructed from computational fluid dynamics outputs and physics-informed engineered features; models were trained using geometry-grouped cross-validation to ensure generalisation across turbulator arrangements and spacing levels. Among candidate regressors, histogram gradient boosting provided the best Nu surrogate (OOF RMSE = 3.299, R² = 0.9908, MAPE = 2.44%), while ridge regression yielded the most accurate friction factor surrogate (OOF RMSE = 4.70×10⁻⁴, R² = 0.9886, MAPE = 1.12%). The combined computational fluid dynamics and machine-learning framework enables fast, reliable evaluation of solar air heater thermo-hydraulic performance for configuration screening and optimisation within the validated operating envelope.
Zitieren
APA
Bisht, V. S., Singh, D. B., Kumar, P., Bhandari, P., Tipu, R. K., Singh, S., & Bist, A. S. (2026). Investigation of Heat Transfer and Flow Characteristics in Solar Air Heaters with a Spherical Turbulator Using Machine Learning Models. Archives of Thermodynamics, 47(2), 99-118. https://doi.org/10.24425/ather.2026.158677
Vancouver
Bisht VS, Singh DB, Kumar P, Bhandari P, Tipu RK, Singh S, et al. Investigation of Heat Transfer and Flow Characteristics in Solar Air Heaters with a Spherical Turbulator Using Machine Learning Models. Archives of Thermodynamics. 2026;47(2):99-118. doi:10.24425/ather.2026.158677
BibTeX
@article{Bisht2026,
author = {Bisht, Vijay Singh and Singh, Desh Bandhu and Kumar, Pushpendra and Bhandari, Prabhakar and Tipu, Rupesh Kumar and Singh, Sandeep and Bist, Ankur Singh},
title = {Investigation of Heat Transfer and Flow Characteristics in Solar Air Heaters with a Spherical Turbulator Using Machine Learning Models},
journal = {Archives of Thermodynamics},
year = {2026},
volume = {47},
number = {2},
pages = {99--118},
doi = {10.24425/ather.2026.158677}
}
EUVIMED