EUVIMEDEUVIMED entdecken
Crossref

Investigation of the Microstructure and Mechanical Properties of Brazing Joints between Niobium and 316L Stainless Steel using Silver-Copper-Palladium Filler

Ruoxu Wang, Lubei Liu, Zongheng Xue, Teng Tan

Archives of Metallurgy and Materials · 19.12.2023 · 1623-1632

DOI: 10.24425/amm.2023.146232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Metallurgy and Materials, online erschienen am 19.12.2023. Verfasst von Ruoxu Wang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper introduces an approach for vacuum brazing of niobium-316L stainless steel transition joints for application in superconducting radiofrequency cavity helium jackets. The study takes advantage of good wettability of Ag-Cu-Pd brazing alloy to suppress brittle Fe-Nb intermetallic formation, hence improve the joints’ mechanical performance. The wettability of Ag-Cu-Pd filler metal on niobium, the interface microstructure and mechanical properties of the transition joints were investigated. Two kinds of Ag-Cu-Pd filler metals had been studied and wet well on the niobium, and the wettability of Ag-31.5Cu-10Pd filler metal on niobium was better than Ag-28Cu-20Pd filler metal. Microstructure characterization demonstrated the absence of brittle intermetallic layers in all of the joint interfaces. Mechanical properties of samples prepared with Ag-31.5Cu-10Pd filler metal were also better than their peers made with Ag-28Cu-20Pd filler metal both room temperature (300 K) and liquid nitrogen temperature (77 K). The transition joints displayed shear strengths of 356-375 MPa at 300 K and 440-457 MPa at 77 K, respectively. After undergoing ten thermal cycles between the room temperature and the liquid nitrogen temperature, the transition joints’ leak rates were all lower than 1.1×10 –11 mbar·L/s. Therefore, Ag-Cu-Pd filler metal is applicable to high vacuum vessels used at cryogenic temperatures.

Zitieren

APA

Wang, R., Liu, L., Xue, Z., & Tan, T. (2023). Investigation of the Microstructure and Mechanical Properties of Brazing Joints between Niobium and 316L Stainless Steel using Silver-Copper-Palladium Filler. Archives of Metallurgy and Materials, 1623-1632. https://doi.org/10.24425/amm.2023.146232

Vancouver

Wang R, Liu L, Xue Z, Tan T. Investigation of the Microstructure and Mechanical Properties of Brazing Joints between Niobium and 316L Stainless Steel using Silver-Copper-Palladium Filler. Archives of Metallurgy and Materials. 2023:1623-1632. doi:10.24425/amm.2023.146232

BibTeX
@article{Wang2023,
  author = {Wang, Ruoxu and Liu, Lubei and Xue, Zongheng and Tan, Teng},
  title = {Investigation of the Microstructure and Mechanical Properties of Brazing Joints between Niobium and 316L Stainless Steel using Silver-Copper-Palladium Filler},
  journal = {Archives of Metallurgy and Materials},
  year = {2023},
  pages = {1623--1632},
  doi = {10.24425/amm.2023.146232}
}
Kostenlos starten →