PAN-Based Carbon Fibers Deposition on NiTi Surface
Archives of Metallurgy and Materials · 15.09.2023 · 1109-1114
DOI: 10.24425/amm.2023.145481 ↗Kurz gefasst
Fachartikel in der Zeitschrift Archives of Metallurgy and Materials, online erschienen am 15.09.2023. Verfasst von T. Goryczka und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
The main objective of the work was to create a layer of carbon nanofibre on the surface of the NiTi shape memory alloy. The coating process was carried out in three stages. First, polyacrylonitrile was deposited by electrospinning. Then it was stabilized at temperatures up to 250°C. The last stage was the carbonization performed below 1000°C. The microstructure of the obtained coatings was observed using a scanning electron microscope. The X-ray diffraction techniques were applied to analyze the coating structure. After the polyacrylonitrile deposition, the fibers had an average diameter of about 280 nm, and the final fibers were almost twice as tiny. The applied steps also changed the phase and crystalline state of the fibers, finally leading to the formation of amorphous-nanocrystalline graphite.
Zitieren
APA
Goryczka, T., Szaraniec, B., Stodolak-Zych, E., & Kluska, S. (2023). PAN-Based Carbon Fibers Deposition on NiTi Surface. Archives of Metallurgy and Materials, 1109-1114. https://doi.org/10.24425/amm.2023.145481
Vancouver
Goryczka T, Szaraniec B, Stodolak-Zych E, Kluska S. PAN-Based Carbon Fibers Deposition on NiTi Surface. Archives of Metallurgy and Materials. 2023:1109-1114. doi:10.24425/amm.2023.145481
BibTeX
@article{Goryczka2023,
author = {Goryczka, T. and Szaraniec, B. and Stodolak-Zych, E. and Kluska, S.},
title = {PAN-Based Carbon Fibers Deposition on NiTi Surface},
journal = {Archives of Metallurgy and Materials},
year = {2023},
pages = {1109--1114},
doi = {10.24425/amm.2023.145481}
}
EUVIMED