EUVIMEDEUVIMED entdecken
Crossref

AlSiMg Alloys Microstructure Determined by Flow Effect During Slow Solidification

P. Mikolajczak

Archives of Foundry Engineering · 06.03.2026

DOI: 10.24425/afe.2026.157969 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Foundry Engineering, online erschienen am 06.03.2026. Verfasst von P. Mikolajczak. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 1 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The presence of gravity during pouring, causes the flow of the alloy in the gating system and the mold cavity, as well as the phenomenon of natural convection at the stage of solidification of the casting. However, the developed casting technologies also use the phenomenon of forced convection, which can be generated by mechanical or electromagnetic mixers. The effect of stirring with electromagnetic coils on the microstructure of Al-Si-Mg alloys was analyzed, based on slowly solidifying small cylindrical samples. In tested Al-Si-Mg alloys, melt flow led to microstructure modification: changed amount, dimension, and location of magnesium-rich Mg2Si precipitates, secondary dendrite arm spacing SDAS, specific surface and grain size of α-Al phase and finally modified eutectic spacing for observed binary and ternary eutectics. Flow produced more and larger blocky shaped and Chinese script phases and significantly reduced amount and dimension of dispersed Mg2Si in the alloy where Mg2Si grow as first phase. By co-precipitation of α-Al and Mg2Si with a basically dendritic shape and internal form of Mg2Si, forced flow increased its SDAS, produced globular forms, whilst did not change the internal spacing. In the alloy where α-Al and Si crystals co-precipitate, stirring caused formation of characteristic eutectic-enriched regions separated from α-Al rich regions. In the alloy where Mg2Si and Si co-precipitate before eutectic growth, stirring caused distinct appearance of dendritic Mg2Si and α-Al. The observed structural modifications are new and can help in assessing of convection effect on microstructure of industrial alloys and support the design of casting processes in which mechanical or electromagnetic stirring is the main phenomena determining microstructure and mechanical properties of cast parts.

Zitieren

APA

Mikolajczak, P. (2026). AlSiMg Alloys Microstructure Determined by Flow Effect During Slow Solidification. Archives of Foundry Engineering. https://doi.org/10.24425/afe.2026.157969

Vancouver

Mikolajczak P. AlSiMg Alloys Microstructure Determined by Flow Effect During Slow Solidification. Archives of Foundry Engineering. 2026. doi:10.24425/afe.2026.157969

BibTeX
@article{Mikolajczak2026,
  author = {Mikolajczak, P.},
  title = {AlSiMg Alloys Microstructure Determined by Flow Effect During Slow Solidification},
  journal = {Archives of Foundry Engineering},
  year = {2026},
  doi = {10.24425/afe.2026.157969}
}
Kostenlos starten →