The Effect of Changes in Degassing Parameters on Gasification and Crystallization of EN AC-46000 Alloy
Archives of Foundry Engineering · 30.12.2025 · 124-132
DOI: 10.24425/afe.2025.155389 ↗Kurz gefasst
Fachartikel in der Zeitschrift Archives of Foundry Engineering, online erschienen am 30.12.2025. Verfasst von T. Szymczak und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 1 Literaturangaben.
Abstract (Originalsprache)
The paper presents research on the influence of degassing process parameters on the crystallization and gasification of EN AC-46000 alloy (designation according to chemical composition – AlSi9Cu3(Fe)). After melting, the alloy was degassed using Ecosal Al113.S solid refiner and by blowing with an inert gas: nitrogen or argon. Various solid degasser contents and various nitrogen and argon blowing times were used. Thermal and derivative analysis (TDA) were used to study the crystallization process of Al-Si alloy. The density index as well as hydrogen content in the liquid alloy were determined. Using Alu Speed Tester, it was demonstrated that the lowest density index and hydrogen content were obtained in the alloy degassed with the use of Ecosal at a concentration of 1% and then blown with argon for 15 minutes. It has been shown that increasing the efficiency of the degassing process results in prolonging the crystallization time of the tested alloy, and in particular, the crystallization time of αAl + β(Si) binary eutectic. The justification given was the probable removal of small solid particles from the liquid metal, which could form the basis for heterogeneous nucleation of the Al-Si alloy component phases during degassing.
Zitieren
APA
Szymczak, T., Pisarek, B., Just, P., Kaczorowski, R., Gumienny, G., Władysiak, R., & Rapiejko, C. (2025). The Effect of Changes in Degassing Parameters on Gasification and Crystallization of EN AC-46000 Alloy. Archives of Foundry Engineering, 124-132. https://doi.org/10.24425/afe.2025.155389
Vancouver
Szymczak T, Pisarek B, Just P, Kaczorowski R, Gumienny G, Władysiak R, et al. The Effect of Changes in Degassing Parameters on Gasification and Crystallization of EN AC-46000 Alloy. Archives of Foundry Engineering. 2025:124-132. doi:10.24425/afe.2025.155389
BibTeX
@article{Szymczak2025,
author = {Szymczak, T. and Pisarek, B.P. and Just, P. and Kaczorowski, R. and Gumienny, G. and Władysiak, R. and Rapiejko, C.},
title = {The Effect of Changes in Degassing Parameters on Gasification and Crystallization of EN AC-46000 Alloy},
journal = {Archives of Foundry Engineering},
year = {2025},
pages = {124--132},
doi = {10.24425/afe.2025.155389}
}
EUVIMED