EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Optimizing of concreting method in mass concrete structure using numerical analysis (roller compacted concrete gravity dam)

Theo Alfaro Dida Darmajaya, Bambang Supriyadi, Suprapto Siswosukarto

Archives of Civil Engineering · 30.06.2026 · 72 (2)

DOI: 10.24425/ace.2026.158625 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Civil Engineering, online erschienen am 30.06.2026. Verfasst von Theo Alfaro Dida Darmajaya und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In mass concrete structures, the increase in temperature due to hydration heat must be carefully studied to minimize the risk of thermal cracking. Gravity dams, a type of mass concrete structure, rely on their own weight to resist the pressure of water. An important innovation in civil construction is Roller-Compacted Concrete (RCC), a form of concrete compacted using a roller compactor. In this study, 3D numerical simulations were conducted using Midas Civil software to analyze the development of hydration temperature within the RCC Tannur Gravity Dam structure in Jordan. The 3D geometric modeling was limited to the cross-section (middle section) of a 15-meter-wide monolithic dam block, assuming symmetry on both sides of the section. Adiabatic boundary conditions were applied to the model to prevent heat loss from the cement hydration reaction. A construction stage analysis was conducted to determine the temperature evolution during each stage of concrete placement. Several simulation scenarios were analyzed, varying the layer thickness (3 m and 4 m), the concreting sequence, and the initial placement temperature of the RCC (20◦C, 25◦C, 30, and 35◦C). Concreting Scheme 2 not only lowers the maximum hydration heat temperature and the associated thermal stress but also speeds up the construction of a dam block by increasing the RCC layer thickness. The results of the numerical modeling demonstrated that controlling the heat of hydration in mass concrete structures can be effectively achieved by optimizing construction methods and parameters.

Zitieren

APA

Darmajaya, T. A. D., Supriyadi, B., & Siswosukarto, S. (2026). Optimizing of concreting method in mass concrete structure using numerical analysis (roller compacted concrete gravity dam). Archives of Civil Engineering, 72(2). https://doi.org/10.24425/ace.2026.158625

Vancouver

Darmajaya TAD, Supriyadi B, Siswosukarto S. Optimizing of concreting method in mass concrete structure using numerical analysis (roller compacted concrete gravity dam). Archives of Civil Engineering. 2026;72(2). doi:10.24425/ace.2026.158625

BibTeX
@article{Darmajaya2026,
  author = {Darmajaya, Theo Alfaro Dida and Supriyadi, Bambang and Siswosukarto, Suprapto},
  title = {Optimizing of concreting method in mass concrete structure using numerical analysis (roller compacted concrete gravity dam)},
  journal = {Archives of Civil Engineering},
  year = {2026},
  volume = {72},
  number = {2},
  doi = {10.24425/ace.2026.158625}
}
Kostenlos starten →