Optimal structure of the connections of a flotation machine with three cells
Gospodarka Surowcami Mineralnymi - Mineral Resources Management · 2018
DOI: 10.24425/118640 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gospodarka Surowcami Mineralnymi - Mineral Resources Management, 2018. Verfasst von Roman Kaula und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Flotation enrichment is a complex process due to the influence of many factors on the course of this process. In macroscopic terms, it is assumed that the quantity that takes into account the influence of all important factors on the enrichment process is the flotation velocity coefficient k. in industrial practice the flotation process is followed by heterogeneous material in terms of flotation properties. Therefore, the flotation velocity coefficient k will be characterized by a certain distribution. Thus, the distribution can be described as the function of the density distribution of the particles flotability f(k). Characteristics of this type are used in the design and optimization of flotation technological circuits. The paper presents a three cells flotation machine with a specific structure of connections of individual cells and the methods of selecting their parameters. The proposed circuit of the three cells flotation machine is characterized by a different connection structure and the specific parameters of each cell than the serial (cell-to-cell) flotation machine. The defined structure of connections between the cells and proper selection of their parameters ensures the maximum slope of the “separation characteristics” of the machine for the velocity coefficient k. Conducting the process of mineral enrichment in the proposed system enables the most efficient separation of the useful feed components. The research was carried out using numerical methods, where the basis of the study was an analytical description of the connection system of three flotation cells being in a steady state, the distribution density characteristic of the particles flotability and the distribution of ash content. The distribution density function of the particles flotability was determined on the basis of the kinetics of the release of the mass of feed components in the batch flotation process. Based on previous work, the authors have shown that the heterogeneity of the feed is well characterized by the model of the triangular distribution function f(k). Using the distribution of particles flotability, the distribution of ash content was determined in relation to the changes in the flotation velocity coefficient. In the final stage of the study, the effects of enrichment obtained in the three cells serial flotation machine (the most common industrial structure) were compared with those obtained in the three cells flotation machine circuit proposed by the authors.
Zitieren
APA
Kaula, R., & Kalinowski, K. (2018). Optimal structure of the connections of a flotation machine with three cells. Gospodarka Surowcami Mineralnymi - Mineral Resources Management. https://doi.org/10.24425/118640
Vancouver
Kaula R, Kalinowski K. Optimal structure of the connections of a flotation machine with three cells. Gospodarka Surowcami Mineralnymi - Mineral Resources Management. 2018. doi:10.24425/118640
BibTeX
@article{Kaula2018,
author = {Kaula, Roman and Kalinowski, Krystian},
title = {Optimal structure of the connections of a flotation machine with three cells},
journal = {Gospodarka Surowcami Mineralnymi - Mineral Resources Management},
year = {2018},
doi = {10.24425/118640}
}
EUVIMED