The use of fly ash for filling the shallow underground ore mine works on the example of the mine reclamation area in Piekary Śląskie
Gospodarka Surowcami Mineralnymi - Mineral Resources Management · 2018
DOI: 10.24425/118637 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gospodarka Surowcami Mineralnymi - Mineral Resources Management, 2018. Verfasst von Grzegorz Strozik.
Abstract (Originalsprache)
In city limits of Piekary Śląskie exist areas of intensively mined shallow deposits of metal ores, in the vicinity of the roof of Triassic carbonate rocks. These terrains constitute degraded areas, which development must be preceded by rehabilitation works. Degradation of the land has been contributed by substantial amount of shafts and mine workings, resulted from open cast and underground operations. Underground workings maintaining beneath weak, fractured, and eroded roof layer of Triassic and Quaternary sediments are strongly vulnerable to roof rocks collapsing and self-filling by loose overburden material. The latter leads to development of discontinuous deformations of the ground surface, which frequently take a form of sinkholes. Probability of roof collapse and self-filling of underground cavities may be assessed on the basis of the height of collapsed and fractured zones, in relation with the thickness of hard rock roof and soft overburden. Janusz-Jarosz model of cavings formation in shallow underground voids has been used to analyse the influence of the degree of filling and type of fill material on the height of collapsed and fractured rocks zones, which develop over collapsed rest of the void volume, where also the effect of the compressibility of the fill material has been considered. The analysis focused on three filling technologies of voids with fly ash from hard coal combustion: pneumatic filling with fresh dry fly ash, pressurized filling with humid fly ash from ash ponds, and hydraulic filling of fresh fly ash – water binding mixtures. Results obtained from the analysis demonstrate that the best conditions for effective filling of the voids and elimination of deformation occurrence on the ground surface provide the use of fly ash – water mixtures.
Zitieren
APA
Strozik, G. (2018). The use of fly ash for filling the shallow underground ore mine works on the example of the mine reclamation area in Piekary Śląskie. Gospodarka Surowcami Mineralnymi - Mineral Resources Management. https://doi.org/10.24425/118637
Vancouver
Strozik G. The use of fly ash for filling the shallow underground ore mine works on the example of the mine reclamation area in Piekary Śląskie. Gospodarka Surowcami Mineralnymi - Mineral Resources Management. 2018. doi:10.24425/118637
BibTeX
@article{Strozik2018,
author = {Strozik, Grzegorz},
title = {The use of fly ash for filling the shallow underground ore mine works on the example of the mine reclamation area in Piekary Śląskie},
journal = {Gospodarka Surowcami Mineralnymi - Mineral Resources Management},
year = {2018},
doi = {10.24425/118637}
}
EUVIMED