The Fume Detecting Dual Tone Modulation Frequency Based Rover Using BLDC Motors
Journal of Advanced Research in Power Electronics and Power Systems · 2020
DOI: 10.24321/2456.1401.202004 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Advanced Research in Power Electronics and Power Systems, 2020. Verfasst von Poorna Mukund Pampani.
Abstract (Originalsprache)
The purpose of this project is to improve the control and precision of any rover by replacing the conventional DC motors or servo motors with the BLDC motors. The BLDC motors are much accurate to control because of the sensors they are equipped with. The telephonic signal from the receiver generates two frequencies one is a higher frequency and the other is a lower frequency. The higher frequency is used to drive the motors. The signal is then received by the receiver phone which then transmits the DTMF signal to the DTMF decoder. The DTMF decoder then decodes the signal and then transmits to the Gate Driver IC (which is connected to the Arduino for motor control). The Gate Driver IC which has the BLDC motors connected to it drives the motors. Furthermore this rover is being operated by Dual Tone Modulation Frequency (DTMF). In addition the rover is equipped with a Gas Sensor.
Zitieren
APA
Pampani, P. M. (2020). The Fume Detecting Dual Tone Modulation Frequency Based Rover Using BLDC Motors. Journal of Advanced Research in Power Electronics and Power Systems. https://doi.org/10.24321/2456.1401.202004
Vancouver
Pampani PM. The Fume Detecting Dual Tone Modulation Frequency Based Rover Using BLDC Motors. Journal of Advanced Research in Power Electronics and Power Systems. 2020. doi:10.24321/2456.1401.202004
BibTeX
@article{Pampani2020,
author = {Pampani, Poorna Mukund},
title = {The Fume Detecting Dual Tone Modulation Frequency Based Rover Using BLDC Motors},
journal = {Journal of Advanced Research in Power Electronics and Power Systems},
year = {2020},
doi = {10.24321/2456.1401.202004}
}
EUVIMED