Morphological, electromagnetic and absorbing properties of pani/epoxy resin samples
Journal of Polymer Science and Engineering · 2018
DOI: 10.24294/jpse.v1i3.589 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Polymer Science and Engineering, 2018. Verfasst von Simone Souza Pinto 1 und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
This work deals with the study of radar absorbing materials (RAM) based on conductive samples obtained with polyaniline (PAni) (5-20 wt%) inserted in epoxy resin matrix. SEM analyses show that the PAni presents granular morphology, with an average diameter of 5 µm, with structures evenly distributed. DRX and FT-IR analyses show that the PAni polymer was successfully obtained in its conductive form. Electrical permittivity and magnetic permeability measurements of PAni/epoxy samples were performed in the frequency range of 8.2 to 12.4 GHz (X-band). Microwave attenuation values showed that the PAni-20wt%/epoxy resin sample presented a maximum attenuation of -24 dB, i.e. ~99.6% attenuation of the incident radiation. It was also observed that the amount of attenuated energy varies according to the incident frequency and the specimen thickness.
Zitieren
APA
1, S. S. P., 1, R. C. F., 2, N. A. S. G., 2, C. V. O., & 1,2, M. C. R. (2018). Morphological, electromagnetic and absorbing properties of pani/epoxy resin samples. Journal of Polymer Science and Engineering. https://doi.org/10.24294/jpse.v1i3.589
Vancouver
1 SSP, 1 RCF, 2 NASG, 2 CVO, 1,2 MCR. Morphological, electromagnetic and absorbing properties of pani/epoxy resin samples. Journal of Polymer Science and Engineering. 2018. doi:10.24294/jpse.v1i3.589
BibTeX
@article{2018,
author = {1, Simone Souza Pinto and 1, Rafaela Chinelatto Filipsen and 2, Newton Adriano Santos Gomes and 2, Carlos Vinícios Opelt and 1,2, Mirabel Cerqueira Rezende},
title = {Morphological, electromagnetic and absorbing properties of pani/epoxy resin samples},
journal = {Journal of Polymer Science and Engineering},
year = {2018},
doi = {10.24294/jpse.v1i3.589}
}
EUVIMED