EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Effect of sewage sludge ash filler on mode I and mode II interlaminar fracture toughness of S-glass/epoxy composites

Mohamad Alsaadi 1,2, Ahmet Erkliğ 2

Journal of Polymer Science and Engineering · 2018

DOI: 10.24294/jpse.v1i3.431 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polymer Science and Engineering, 2018. Verfasst von Mohamad Alsaadi 1,2 und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the influence of sewage sludge ash (SSA) waste particle contents on the mechanical properties and interlaminar fracture toughness for mode I and mode II delamination of S-glass fiber reinforced epoxy composites were investigated. Composite laminate specimens for tensile, flexural double-cantilever beam (DCB) and end-notched flexure (ENF) tests were prepared and tested according to ASTM standards with 5, 10, 15 and 20 wt% SSA filled S-glass/epoxy composites. Properties improvement reasons was explained based on optical and scanning electron microscopy. The highest improvement in tensile and flexural strength was obtained with 10 wt% content of SSA. The highest mode I and mode II interlaminar fracture toughness’s were obtained with 15 wt% content of SSA. The mode I and mode II interlaminar fracture toughness’s improved by 33 and 63.6%, respectively, compared to the composite without SSA.

Zitieren

APA

1,2, M. A., & 2, A. E. (2018). Effect of sewage sludge ash filler on mode I and mode II interlaminar fracture toughness of S-glass/epoxy composites. Journal of Polymer Science and Engineering. https://doi.org/10.24294/jpse.v1i3.431

Vancouver

1,2 MA, 2 AE. Effect of sewage sludge ash filler on mode I and mode II interlaminar fracture toughness of S-glass/epoxy composites. Journal of Polymer Science and Engineering. 2018. doi:10.24294/jpse.v1i3.431

BibTeX
@article{2018,
  author = {1,2, Mohamad Alsaadi and 2, Ahmet Erkliğ},
  title = {Effect of sewage sludge ash filler on mode I and mode II interlaminar fracture toughness of S-glass/epoxy composites},
  journal = {Journal of Polymer Science and Engineering},
  year = {2018},
  doi = {10.24294/jpse.v1i3.431}
}
Kostenlos starten →