Ti-Mo alloys: Corrosion study in solutions simulating commercial gels
Journal of Polymer Science and Engineering · 2018
DOI: 10.24294/jpse.v1i1.897 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Polymer Science and Engineering, 2018. Verfasst von Aline Varella Rodrigues und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Regarding to the influence of chloride and fluoride ions on the corrosion resistance, the electrochemical behavior of Ti alloys has been deeply studied. In this work, the main goal was to investigate the electrochemical behavior of cp-Ti and Ti-Mo alloys containing 6, 10 and 15 wt% of Mo concentrations. All the samples were immersed in different solutions, such as 0.15 mol L-1 Na2SO4, 0.15 mol L-1 Ringer, 0.15 mol L-1 Ringer plus 0.036 mol L-1 NaF and 0.036 mol L-1 NaF. Simulating the commercial fluorinated gels, the NaF solutions naturally-aerated were prepared with 1450 ppm of fluoride ions. The electrochemical techniques applied in this work were the open-circuit potential, cyclic voltammetry, besides the technique for chemical identification, which was X-ray photoelectron spectroscopy. The formation and growth of TiO2 and MoO2 were identified, without pitting corrosion. The electrochemical stability and the corrosion resistance of the Ti-Mo alloys decreased in the solutions containing chloride and fluoride ions, with an appreciative decrease especially in the fluorinated medium. The Ti-Mo alloy with higher Mo content concentration was the material with higher corrosion resistance. Therefore, it is a promising candidate as a biomaterial, once the osseointegration needs a satisfactory corrosion resistance for being achieved.
Zitieren
APA
Rodrigues, A. V., & Guastaldi, A. C. (2018). Ti-Mo alloys: Corrosion study in solutions simulating commercial gels. Journal of Polymer Science and Engineering. https://doi.org/10.24294/jpse.v1i1.897
Vancouver
Rodrigues AV, Guastaldi AC. Ti-Mo alloys: Corrosion study in solutions simulating commercial gels. Journal of Polymer Science and Engineering. 2018. doi:10.24294/jpse.v1i1.897
BibTeX
@article{Rodrigues2018,
author = {Rodrigues, Aline Varella and Guastaldi, Antonio Carlos},
title = {Ti-Mo alloys: Corrosion study in solutions simulating commercial gels},
journal = {Journal of Polymer Science and Engineering},
year = {2018},
doi = {10.24294/jpse.v1i1.897}
}
EUVIMED