Porogen effect of solvents on pore size distribution of solvent-casted polycaprolactone thin films
Journal of Polymer Science and Engineering · 2018
DOI: 10.24294/jpse.v1i1.1076 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Polymer Science and Engineering, 2018. Verfasst von Fariba Safaei und 4 weiteren Autor:innen.
Abstract (Originalsprache)
In this study, the effect of porogenic solvents on pore size distribution of the polycaprolactone (PCL) thin films was investigated. Five thin PCL films were prepared using the solvent-casting method. Chloroform, Methylene Chloride (MC) and three different compositions of MC/ Dimethylformamide (DMF) (80/20, 50/50 and 20/80) were used as solvents. Scanning Electron Microscopy (SEM) investigations were employed to study morphology and consequently the pore size distribution of the prepared films. The PCL films made by chloroform and MC as a solvent were completely non-porous. Whereas the other films (made by a combination of MC and DMF) showed both uni-modal and bi-modal pore size distributions.
Zitieren
APA
Safaei, F., Khalili, S., Khorasani, S. N., Ghasemi-Mobarakeh, L., & Neisiany, R. E. (2018). Porogen effect of solvents on pore size distribution of solvent-casted polycaprolactone thin films. Journal of Polymer Science and Engineering. https://doi.org/10.24294/jpse.v1i1.1076
Vancouver
Safaei F, Khalili S, Khorasani SN, Ghasemi-Mobarakeh L, Neisiany RE. Porogen effect of solvents on pore size distribution of solvent-casted polycaprolactone thin films. Journal of Polymer Science and Engineering. 2018. doi:10.24294/jpse.v1i1.1076
BibTeX
@article{Safaei2018,
author = {Safaei, Fariba and Khalili, Shahla and Khorasani, Saied Nouri and Ghasemi-Mobarakeh, Laleh and Neisiany, Rasoul Esmaeely},
title = {Porogen effect of solvents on pore size distribution of solvent-casted polycaprolactone thin films},
journal = {Journal of Polymer Science and Engineering},
year = {2018},
doi = {10.24294/jpse.v1i1.1076}
}
EUVIMED