EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Face-centred design approach for modelling and predicting areal surface roughness in freeform surface milling of stavax ESR

Mohd Faizal Yasak, Ahmad Faiz Zubair, Mohd Fauzi Ismail, Muhammad Akmal Mohd Zakaria

Journal of Applied Engineering Design and Simulation · 25.09.2026 · 6 (2) · 62-77

DOI: 10.24191/jaeds.v6i2.222 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Engineering Design and Simulation, online erschienen am 25.09.2026. Verfasst von Mohd Faizal Yasak und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Freeform surfaces have become a major element in high precision industrial design, such as moulds and dies. These sculptured surfaces are characterised by non-uniform and aesthetic features requiring high-quality surface finishing. Therefore, minimising surface roughness becomes critical, especially when machining Stavax, a well-known material, in moulds and dies. This study aims to optimise 3-axis CNC ball nose milling parameters, namely spindle speed (vc), feed rate (fz), and depth of cut (ap), in minimising areal surface roughness on the B-Spline tensor product of the Stavax freeform profile. A total of 17 experimental runs were designed using a face-centred composite approach (FCD) under the response surface methodology (RSM). Areal surface roughness data were captured via Alicona InfiniteFocus and then evaluated by MountainsLab in compliance with ISO 25178. ANOVA validation indicated a highly reliable predictive model, characterised by an R2 of 0.9680, an adjusted R2 of 0.9268, and a predicted R2 of 0.8762 with the difference less than 0.2. This study also developed the FCD mathematical model for factors influencing the roughness.

Zitieren

APA

Yasak, M. F., Zubair, A. F., Ismail, M. F., & Zakaria, M. A. M. (2026). Face-centred design approach for modelling and predicting areal surface roughness in freeform surface milling of stavax ESR. Journal of Applied Engineering Design and Simulation, 6(2), 62-77. https://doi.org/10.24191/jaeds.v6i2.222

Vancouver

Yasak MF, Zubair AF, Ismail MF, Zakaria MAM. Face-centred design approach for modelling and predicting areal surface roughness in freeform surface milling of stavax ESR. Journal of Applied Engineering Design and Simulation. 2026;6(2):62-77. doi:10.24191/jaeds.v6i2.222

BibTeX
@article{Yasak2026,
  author = {Yasak, Mohd Faizal and Zubair, Ahmad Faiz and Ismail, Mohd Fauzi and Zakaria, Muhammad Akmal Mohd},
  title = {Face-centred design approach for modelling and predicting areal surface roughness in freeform surface milling of stavax ESR},
  journal = {Journal of Applied Engineering Design and Simulation},
  year = {2026},
  volume = {6},
  number = {2},
  pages = {62--77},
  doi = {10.24191/jaeds.v6i2.222}
}
Kostenlos starten →