Design, simulation and fabrication of a space frame chassis for a formula student electric vehicle
Journal of Applied Engineering Design and Simulation · 02.11.2026 · 6 (2) · 177-192
DOI: 10.24191/jaeds.v6i2.198 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Engineering Design and Simulation, online erschienen am 02.11.2026. Verfasst von Muhammad Afiq Firdaus Bin Hairul Anuar und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Innovation in automotive engineering is increasingly aimed at electric vehicles (EVs), and students can demonstrate their potential by participating in Formula Student events. To ensure EVs operate at peak performance while maintaining safety, a well-developed chassis is essential. This study focuses on designing a Formula Student electric vehicle chassis that balances high strength with lightweight properties. The primary objective was to design and develop a structurally robust chassis using SolidWorks for modeling and Finite Element Analysis (FEA) to evaluate performance under various loads. Several material options were explored, with Mild Steel (AISI 1020) selected based on its strength-to-weight ratio, ease of fabrication, and cost-effectiveness for student-led projects. The final design was validated through impact simulations (front, rear, and side) and successfully fabricated using conventional techniques including MIG welding. Results indicate that while the rear structure remained within the elastic region, front and side impacts exceeded yield strength, suggesting areas for future reinforcement. The project demonstrates a viable framework for designing FSEV chassis that adheres to the 2025 FSAE regulations.
Zitieren
APA
Anuar, M. A. F. B. H., Sharudin, H. B., Kasim, H. A., Salleh, M. F. M., Ismail, N. I., & Basri, M. H. M. (2026). Design, simulation and fabrication of a space frame chassis for a formula student electric vehicle. Journal of Applied Engineering Design and Simulation, 6(2), 177-192. https://doi.org/10.24191/jaeds.v6i2.198
Vancouver
Anuar MAFBH, Sharudin HB, Kasim HA, Salleh MFM, Ismail NI, Basri MHM. Design, simulation and fabrication of a space frame chassis for a formula student electric vehicle. Journal of Applied Engineering Design and Simulation. 2026;6(2):177-192. doi:10.24191/jaeds.v6i2.198
BibTeX
@article{Anuar2026,
author = {Anuar, Muhammad Afiq Firdaus Bin Hairul and Sharudin, Hazim bin and Kasim, Haszeme Abu and Salleh, Mohd Fahmi Md and Ismail, Noor Iswadi and Basri, Mahamad Hisyam Mahamad},
title = {Design, simulation and fabrication of a space frame chassis for a formula student electric vehicle},
journal = {Journal of Applied Engineering Design and Simulation},
year = {2026},
volume = {6},
number = {2},
pages = {177--192},
doi = {10.24191/jaeds.v6i2.198}
}
EUVIMED