Analysis of the power quality in the line supplying arc devices based on measurements of arc voltage and current
Journal of Automation, Electronics and Electrical Engineering · 16.11.2026 · 8 (3) · 37-59
DOI: 10.24136/jaeee.2026.010 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Automation, Electronics and Electrical Engineering, online erschienen am 16.11.2026. Verfasst von Zbigniew Olczykowski. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Electric arc furnaces, due to their high unit power and dynamic current changes, are receivers that generate several disturbances affecting the power quality in the supply network. Dynamic changes in the furnace current (power) result from changes in the length of the electric arc between the electrodes and the charge. The greatest energy quality disturbances occur during the initial melting phase of the charge and after subsequent scrap batches are delivered to the furnace. Later in the melting process, as the amount of melted charge increases, the electric arc becomes increasingly stable, reducing the furnace's negative impact on the power grid. For many years, work has been underway to develop an electric arc furnace model that will best represent the melting process. One of the most important elements of the furnace model is the electric arc, whose mathematical description is the most challenging. The article presents a model of the electric arc furnace based on arc voltage and current. The arc current and voltage were recorded throughout the entire smelting process. The results of model tests developed in the MATLAB/SIMULINK environment for an electric arc furnace were verified against measurements in real conditions.
Zitieren
APA
Olczykowski, Z. (2026). Analysis of the power quality in the line supplying arc devices based on measurements of arc voltage and current. Journal of Automation, Electronics and Electrical Engineering, 8(3), 37-59. https://doi.org/10.24136/jaeee.2026.010
Vancouver
Olczykowski Z. Analysis of the power quality in the line supplying arc devices based on measurements of arc voltage and current. Journal of Automation, Electronics and Electrical Engineering. 2026;8(3):37-59. doi:10.24136/jaeee.2026.010
BibTeX
@article{Olczykowski2026,
author = {Olczykowski, Zbigniew},
title = {Analysis of the power quality in the line supplying arc devices based on measurements of arc voltage and current},
journal = {Journal of Automation, Electronics and Electrical Engineering},
year = {2026},
volume = {8},
number = {3},
pages = {37--59},
doi = {10.24136/jaeee.2026.010}
}
EUVIMED