Design and Analysis of a 5 m3 Excavator Bucket for Coal Handling Using Topology Optimization and Finite Elemen Analysis
TURBO: Jurnal Program Studi Teknik Mesin · 26.10.2026 · 15 (2) · 154-163
DOI: 10.24127/trb.v15i2.5420 ↗Kurz gefasst
Fachartikel in der Zeitschrift TURBO: Jurnal Program Studi Teknik Mesin, online erschienen am 26.10.2026. Verfasst von Farhan Hidayat und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Conventional excavator bucket designs frequently exhibit over-engineering, which reduces operational efficiency due to excessive structural mass. This study aims to optimize the PC500 bucket with a capacity of 5 m³ to reduce mass and evaluate fatigue. 3D modeling was performed using SolidWorks, while Finite Element Analysis (FEA) testing was simulated through Ansys Workbench. The load simulations applied the parameters of HARDOX 400 steel material. The topology optimization results successfully reduced the bucket mass by 10.65%, from 2,702.04 kg to 2,414.31 kg. The payload capacity also increased from 5 m³ to 5.2 m³. The FEA recorded a maximum von Mises stress of 256.71 MPa with a minimum safety factor of 3.895, ensuring structural safety. The fatigue evaluation proved that the design is safe from fatigue failure. The optimized bucket is proven to be lighter, more efficient, and has a larger capacity.
Zitieren
APA
Hidayat, F., Basuki, B., Santoso, N., Wibowo, S. B., & Harjono (2026). Design and Analysis of a 5 m3 Excavator Bucket for Coal Handling Using Topology Optimization and Finite Elemen Analysis. TURBO: Jurnal Program Studi Teknik Mesin, 15(2), 154-163. https://doi.org/10.24127/trb.v15i2.5420
Vancouver
Hidayat F, Basuki B, Santoso N, Wibowo SB, Harjono. Design and Analysis of a 5 m3 Excavator Bucket for Coal Handling Using Topology Optimization and Finite Elemen Analysis. TURBO: Jurnal Program Studi Teknik Mesin. 2026;15(2):154-163. doi:10.24127/trb.v15i2.5420
BibTeX
@article{Hidayat2026,
author = {Hidayat, Farhan and Basuki, Budi and Santoso, Nugroho and Wibowo, Setyawan Bekti and Harjono},
title = {Design and Analysis of a 5 m3 Excavator Bucket for Coal Handling Using Topology Optimization and Finite Elemen Analysis},
journal = {TURBO: Jurnal Program Studi Teknik Mesin},
year = {2026},
volume = {15},
number = {2},
pages = {154--163},
doi = {10.24127/trb.v15i2.5420}
}
EUVIMED