EUVIMEDEUVIMED entdecken
Crossref

Behavior of Composite Parts Adhesively Joined With Single Lap Joint and Intermediated Material Under Tensile Load

İsmail Yasin SÜLÜ

International Journal of Engineering and Applied Sciences · 2023

DOI: 10.24107/ijeas.1296738 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Engineering and Applied Sciences, 2023. Verfasst von İsmail Yasin SÜLÜ. Die Arbeit nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In research, composite parts adhesively joined with single-lap joint (SLJ) and intermediated material under tensile load were examined by finite element analysis (FEA). While T700 Carbon/epoxy was used for composite parts and intermediate material, DP 410 type was preferred for adhesive. The numerical studies were carried out by ANSYS 14.5 based on finite elements method. The von-Mises failure criteria and the Tsai-wu failure criteria were respectively considered for adhesive and composites. The analyses were firstly actualized to determine the failure loads for each parameter situation. The stresses at obtained failure load for each parameter state were investigated. The critical equivalent stresses on adhesive layers were examined and the critical stress lines for length and width was determined. The distributions of normal and shear stresses in all directions were obtained by considering critical stress line on adhesive layers. Similarly, the von-Mises stress distributions were obtained. Considering critical stress lines, the stress distributions on width and length of overlap dimensional were compared. The effects of overlap dimensional, orientation angle and intermediated material on effect of joint zone were investigated.

Zitieren

APA

SÜLÜ, İ. Y. (2023). Behavior of Composite Parts Adhesively Joined With Single Lap Joint and Intermediated Material Under Tensile Load. International Journal of Engineering and Applied Sciences. https://doi.org/10.24107/ijeas.1296738

Vancouver

SÜLÜ İY. Behavior of Composite Parts Adhesively Joined With Single Lap Joint and Intermediated Material Under Tensile Load. International Journal of Engineering and Applied Sciences. 2023. doi:10.24107/ijeas.1296738

BibTeX
@article{SL2023,
  author = {SÜLÜ, İsmail Yasin},
  title = {Behavior of Composite Parts Adhesively Joined With Single Lap Joint and Intermediated Material Under Tensile Load},
  journal = {International Journal of Engineering and Applied Sciences},
  year = {2023},
  doi = {10.24107/ijeas.1296738}
}
Kostenlos starten →