EUVIMEDEUVIMED entdecken
Crossref

Sub-modelling approach for the simulative analysis of frictional contact properties regarding ring creep of a WT planet carrier bearing

Pascal Bußkamp, Georg Jacobs, Julian Röder, Malte Raddatz, Maximilian Warkentin

Tribologie und Schmierungstechnik · 16.11.2026 · 73 (3)

DOI: 10.24053/tus-73-0014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tribologie und Schmierungstechnik, online erschienen am 16.11.2026. Verfasst von Pascal Bußkamp und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rolling element bearings in drivetrains of modern wind turbines (WT) are susceptible to ring creep, as greater structural deformation is assumed due to the decreased wall thicknesses as a result of increased torque density. The deformation of bearing seats is associated with shear stresses. If local shear stresses exceed the shear stress limit, micro slip occurs. The accumulation of micro slip in the bearing seat leads to a macroscopic ring movement relative to the adjacent structure (housing or shaft), referred to as ring creep. One component in WT drivetrains that is prone to ring creep is the planet carrier bearing (PCB). Typically, the finite element method is used to predict ring creep within the analyzed subsystem. Recent research introduced a sub-modelling approach for simulative ring creep investigations of an exemplary WT main bearing reducing the calculation effort. In this work, the sub-modelling method is applied to PCB ring creep investigations. The method encompasses a global and a sub-model. First, the global model is used to calculate the rolling element forces and the deformation in the vicinity of the bearing seat considering the loads on and the stiffness of the investigated system. Second, the sub-model is reduced to the components bearing ring, axial supports and a section of the adjacent structure to minimize the computational effort by focusing on solving the frictional contact equations in the bearing seat. The sub-model enables sensitivity analysis of the contact parameters in the bearing seat with reduced computational effort. Using the sub-model of a WT PCB the significant influence of the coefficient of friction and the elastic slip tolerance on ring creep is observed and the opposing behavior of both ring creep mechanisms (structure and rolling element induced ring creep) can be demonstrated. Although structure-induced ring creep dominates, rolling element-induced ring creep is more strongly influenced by variations in the coefficient of friction. In addition, a significant increase in elastic slip tolerance can amplify rolling element-induced ring creep, leading to a reversal of the dominant mechanism.

Zitieren

APA

Bußkamp, P., Jacobs, G., Röder, J., Raddatz, M., & Warkentin, M. (2026). Sub-modelling approach for the simulative analysis of frictional contact properties regarding ring creep of a WT planet carrier bearing. Tribologie und Schmierungstechnik, 73(3). https://doi.org/10.24053/tus-73-0014

Vancouver

Bußkamp P, Jacobs G, Röder J, Raddatz M, Warkentin M. Sub-modelling approach for the simulative analysis of frictional contact properties regarding ring creep of a WT planet carrier bearing. Tribologie und Schmierungstechnik. 2026;73(3). doi:10.24053/tus-73-0014

BibTeX
@article{Bukamp2026,
  author = {Bußkamp, Pascal and Jacobs, Georg and Röder, Julian and Raddatz, Malte and Warkentin, Maximilian},
  title = {Sub-modelling approach for the simulative analysis of frictional contact properties regarding ring creep of a WT planet carrier bearing},
  journal = {Tribologie und Schmierungstechnik},
  year = {2026},
  volume = {73},
  number = {3},
  doi = {10.24053/tus-73-0014}
}
Kostenlos starten →