EUVIMEDEUVIMED entdecken
Crossref

Tribological Investigations of Radial Shaft Seal with Focus on 3D Printed Counter Surface

Yongzhen Lin, Matthias Kröger, Jenny Köckritz, Deeksha Lohani, Ringo Nepp

Tribologie und Schmierungstechnik · 27.07.2026 · 73 (1)

DOI: 10.24053/tus-73-0004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tribologie und Schmierungstechnik, online erschienen am 27.07.2026. Verfasst von Yongzhen Lin und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tribological performance of radial shaft seals (RSS) has been evaluated among experimental investigations with different metal counter surfaces in the recent decades. The counter surface has been identified as one of the main drivers determining the tribological performance of RSS. In general, the metal counterpart needs to be manufactured specifically to achieve a specific surface structure as well as an optimal surface roughness. The appropriate application of RSS as a dynamic seal element in different types is depending on different boundary conditions. In order to extend the knowledge on the boundary conditions specifically the potential application of RSS on 3D printed counterparts, tribological investigations have been performed and evaluated in this work. More specifically, 3D printed counterparts with different materials, various 3D printing processes with or without postprocessing have been examined. The potential operation limits such as temperature and rotation speed have been searched. Correlations between the counter surface properties and the tribological performance have been observed and evaluated from different aspects and in different ways. The results of this work are determined experimentally, particularly focusing on the methodical approach on 3D printed counterparts. A specifically established RSS test rig at the Institute for Machine Elements, Design and Manufacturing is available for the experimental tribological investigations. The aim of this work is to set up a basis for the future researches and potential applications regarding optimization operation conditions of RSS for wear reduction and service life extension. As well as gaining new insights for the possibility of 3D printed counterparts in tribological investigation of RSS.

Zitieren

APA

Lin, Y., Kröger, M., Köckritz, J., Lohani, D., & Nepp, R. (2026). Tribological Investigations of Radial Shaft Seal with Focus on 3D Printed Counter Surface. Tribologie und Schmierungstechnik, 73(1). https://doi.org/10.24053/tus-73-0004

Vancouver

Lin Y, Kröger M, Köckritz J, Lohani D, Nepp R. Tribological Investigations of Radial Shaft Seal with Focus on 3D Printed Counter Surface. Tribologie und Schmierungstechnik. 2026;73(1). doi:10.24053/tus-73-0004

BibTeX
@article{Lin2026,
  author = {Lin, Yongzhen and Kröger, Matthias and Köckritz, Jenny and Lohani, Deeksha and Nepp, Ringo},
  title = {Tribological Investigations of Radial Shaft Seal with Focus on 3D Printed Counter Surface},
  journal = {Tribologie und Schmierungstechnik},
  year = {2026},
  volume = {73},
  number = {1},
  doi = {10.24053/tus-73-0004}
}
Kostenlos starten →