EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Reducing No Booting Defects in IC SoC Functional Testing Using Six Sigma DMAIC: Evidence from PCBA Digital Test Stations

Novian Hadinata, Mokh Suef

Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri · 20.07.2026 · 12 (2) · 169-181

DOI: 10.24014/e7sn0n75 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, online erschienen am 20.07.2026. Verfasst von Novian Hadinata und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The No Booting defect blocks functional verification of Integrated Circuit System on Chip (IC SoC) components during Printed Circuit Board Assembly (PCBA) testing. This study applies Six Sigma with the Define, Measure, Analyze, Improve, and Control (DMAIC) framework to reduce No Booting defects at the Digital Rights Management (DRM) and Digital Function Test (DFT) stations of PT XYZ, a television and monitor manufacturer. A Pareto analysis of the baseline data showed that No Booting accounted for 82.51% of all IC SoC defects, making it the dominant quality problem at these two stations. Root-cause analysis, combining a 6M fishbone diagram with Failure Mode and Effects Analysis (FMEA), ranked a thermal gap between the thermal pad and the heatsink on the test fixture as the leading risk (RPN = 720), ahead of any actual defect in the IC SoC itself. Direct temperature measurement confirmed that the fixture was overheating the component during testing, producing a false NG (Not Good) result rather than a true component failure. Correcting the thermal gap cut the defect rate by 83.40% and raised the process sigma level from 4.22 to 4.77, a statistically significant improvement. The case shows that a defect first classified as an IC SoC failure was, in this instance, caused by the test system rather than the component, and the corrective action was directed at the fixture rather than at replacing the chip.

Zitieren

APA

Hadinata, N., & Suef, M. (2026). Reducing No Booting Defects in IC SoC Functional Testing Using Six Sigma DMAIC: Evidence from PCBA Digital Test Stations. Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 12(2), 169-181. https://doi.org/10.24014/e7sn0n75

Vancouver

Hadinata N, Suef M. Reducing No Booting Defects in IC SoC Functional Testing Using Six Sigma DMAIC: Evidence from PCBA Digital Test Stations. Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri. 2026;12(2):169-181. doi:10.24014/e7sn0n75

BibTeX
@article{Hadinata2026,
  author = {Hadinata, Novian and Suef, Mokh},
  title = {Reducing No Booting Defects in IC SoC Functional Testing Using Six Sigma DMAIC: Evidence from PCBA Digital Test Stations},
  journal = {Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri},
  year = {2026},
  volume = {12},
  number = {2},
  pages = {169--181},
  doi = {10.24014/e7sn0n75}
}
Kostenlos starten →