EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Feasibility and optimization of a bush-cut aluminium bronze big end bearing: a simulation-based study

Sami Kreivi, Teemu Kuivaniemi, Antti Mäntylä, Joona Vaara, Jaakko Istolahti, Pasi Halla-aho, Antti-Jussi Vuotikka, Tero Frondelius

Rakenteiden Mekaniikka · 2023

DOI: 10.23998/rm.132039 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rakenteiden Mekaniikka, 2023. Verfasst von Sami Kreivi und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The big end bearing of a connecting rod is one of the most highly loaded bearings in marine engines. This paper presents a feasibility study and optimization of the geometrical parameters of a bush-cut bronze bearing for connecting rods in large-bore marine engines. An accurate simulation workflow was developed and carried out in Abaqus to analyze whether a new simple and cost-saving alternative for manufacturing big end bearings would be possible. The simulations showed that aluminium bronze is feasible regarding stress and yielding. However, improvements were needed to increase the radial contact pressure and decrease the compressive tangential stress peaks on the ends of the split bearing. The optimized design parameters included the outer diameter and thickness of the bearing, the thickness of the cutting blade, and the cut angle. Especially the combination of optimized blade thickness and cut angle generated promising results. The findings of this study provide valuable insights and design principles for bearing design processes.

Zitieren

APA

Kreivi, S., Kuivaniemi, T., Mäntylä, A., Vaara, J., Istolahti, J., Halla-aho, P., Vuotikka, A., & Frondelius, T. (2023). Feasibility and optimization of a bush-cut aluminium bronze big end bearing: a simulation-based study. Rakenteiden Mekaniikka. https://doi.org/10.23998/rm.132039

Vancouver

Kreivi S, Kuivaniemi T, Mäntylä A, Vaara J, Istolahti J, Halla-aho P, et al. Feasibility and optimization of a bush-cut aluminium bronze big end bearing: a simulation-based study. Rakenteiden Mekaniikka. 2023. doi:10.23998/rm.132039

BibTeX
@article{Kreivi2023,
  author = {Kreivi, Sami and Kuivaniemi, Teemu and Mäntylä, Antti and Vaara, Joona and Istolahti, Jaakko and Halla-aho, Pasi and Vuotikka, Antti-Jussi and Frondelius, Tero},
  title = {Feasibility and optimization of a bush-cut aluminium bronze big end bearing: a simulation-based study},
  journal = {Rakenteiden Mekaniikka},
  year = {2023},
  doi = {10.23998/rm.132039}
}
Kostenlos starten →