Development and Validation of a Standardized Bicycle Finite Element Model Based on ISO Standards
Journal of Engineering Mechanics and Machinery · 2026 · 11 (1)
DOI: 10.23977/jemm.2026.110120 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Engineering Mechanics and Machinery, 2026.
Abstract (Originalsprache)
: Vehicle-to-bicycle impact simulation analyses require bicycle models with consistent geometric parameters, deformable structural responses, and reliable validation data. Existing studies have often adopted multi-body bicycle models or finite element models reconstructed from specific physical bicycles. These models can satisfy accident reconstruction and scenario-specific analyses, but limitations remain in the uniformity of geometric sources, model reproducibility and structural validation criteria. In this study, a standardized bicycle finite element model was developed according to the geometric requirements for bicyclist targets specified in ISO 19206-4:2020. A two-dimensional parametric wireframe sketch was first established using key reference points, including the bottom bracket center, wheel centers, frame nodes, handlebar, saddle and pedal-related locations. A three-dimensional CAD model was then constructed in SolidWorks, followed by mesh generation, material assignment and connection modeling in ANSA. The model was mainly discretized using shell elements, with a global mesh size of 8 mm and local refinement to 4 mm in key connection regions. Revolute joints and constrained nodal rigid body connections were used to represent rotational pairs and local rigid connections, respectively. The final model contained 78,249 elements. Drop-weight and free-fall impact simulations were conducted according to the frame and fork test methods specified in ISO 4210-6:2023. The maximum permanent deformation was 6.1 mm in the drop-weight test and 2.0 mm in the free-fall test, both below the corresponding standard limits. The results indicate that the developed model has a clear standardized geometric basis, reasonable connection definitions and stable component-level structural response, providing a basis for vehicle-to-bicycle impact simulations and active-safety test-scenario development.
Zitieren
APA
(2026). Development and Validation of a Standardized Bicycle Finite Element Model Based on ISO Standards. Journal of Engineering Mechanics and Machinery, 11(1). https://doi.org/10.23977/jemm.2026.110120
Vancouver
Development and Validation of a Standardized Bicycle Finite Element Model Based on ISO Standards. Journal of Engineering Mechanics and Machinery. 2026;11(1). doi:10.23977/jemm.2026.110120
BibTeX
@article{euvimed2026,
title = {Development and Validation of a Standardized Bicycle Finite Element Model Based on ISO Standards},
journal = {Journal of Engineering Mechanics and Machinery},
year = {2026},
volume = {11},
number = {1},
doi = {10.23977/jemm.2026.110120}
}
EUVIMED