EUVIMEDEUVIMED entdecken
Crossref

Dynamic Response Analysis of Sieve Screening under Complex Working Conditions

Journal of Engineering Mechanics and Machinery · 2026 · 11 (1)

DOI: 10.23977/jemm.2026.110111 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Mechanics and Machinery, 2026.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

: To explore the influence of silo load and material distribution on the motion characteristics of partition screens, a four-degree-of-freedom dynamic model was established via the Lagrange method. The model was solved for different spring damage degrees and load conditions using the New-Mark β method. Results indicate that under complex operating conditions involving silo mass and uneven material distribution, the screen surface exhibits enhanced instability—with the feed end showing downward tilting and an increased swing angle. The amplitudes in the z and y directions increase with the degree of spring damage, whereas the amplitudes in the θ and φ directions and the location of spring damage are associated with the severity of spring damage. Under varying load and spring damage conditions, the displacement difference between springs increases linearly with load magnitude. At the same end of the screen, the inter-spring displacement difference ranges from 32% to 93%. Under the same load, diagonal spring damage leads to the maximum inter-spring displacement difference (221%), inducing severe screen vibration.

Zitieren

APA

(2026). Dynamic Response Analysis of Sieve Screening under Complex Working Conditions. Journal of Engineering Mechanics and Machinery, 11(1). https://doi.org/10.23977/jemm.2026.110111

Vancouver

Dynamic Response Analysis of Sieve Screening under Complex Working Conditions. Journal of Engineering Mechanics and Machinery. 2026;11(1). doi:10.23977/jemm.2026.110111

BibTeX
@article{euvimed2026,
  title = {Dynamic Response Analysis of Sieve Screening under Complex Working Conditions},
  journal = {Journal of Engineering Mechanics and Machinery},
  year = {2026},
  volume = {11},
  number = {1},
  doi = {10.23977/jemm.2026.110111}
}
Kostenlos starten →