EUVIMEDEUVIMED entdecken
Crossref

Process-Route Optimization of a Solid Intermediate Shaft for Constant-Velocity Universal Transmission

Journal of Engineering Mechanics and Machinery · 2026 · 11 (1)

DOI: 10.23977/jemm.2026.110108 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Mechanics and Machinery, 2026.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

: This study optimizes the process route of a constant-velocity (CV) universal transmission intermediate solid shaft under specified static-torque and fatigue constraints. A combined analytical-FEA workflow was established for pure torsion and bending-torsion conditions based on assembly test specifications. The critical zone was identified at the spline-root fillet transition. Radial hardness data after induction hardening were converted into a local static-strength field and compared with an ideal demand field derived from equivalent stress and safety-factor requirements. The original route exhibited a subsurface strength depression overlapping with the high-stress region, resulting in the minimum local safety margin. After increasing the lower bound of effective case depth and smoothing the hardness gradient, negative local margins were eliminated and stress-strength matching improved significantly. Modal analysis identified slender low-stiffness sections and vibration-sensitive locations, providing guidance for support placement and spindle-speed window planning. Bench tests showed failure concentration near spline run-out regions, consistent with predictions, while meeting specified performance targets. The proposed stress field-static-strength field-modal coupling framework enables section-wise process control and provides a practical route for reliability-oriented optimization of similar splined shaft components.

Zitieren

APA

(2026). Process-Route Optimization of a Solid Intermediate Shaft for Constant-Velocity Universal Transmission. Journal of Engineering Mechanics and Machinery, 11(1). https://doi.org/10.23977/jemm.2026.110108

Vancouver

Process-Route Optimization of a Solid Intermediate Shaft for Constant-Velocity Universal Transmission. Journal of Engineering Mechanics and Machinery. 2026;11(1). doi:10.23977/jemm.2026.110108

BibTeX
@article{euvimed2026,
  title = {Process-Route Optimization of a Solid Intermediate Shaft for Constant-Velocity Universal Transmission},
  journal = {Journal of Engineering Mechanics and Machinery},
  year = {2026},
  volume = {11},
  number = {1},
  doi = {10.23977/jemm.2026.110108}
}
Kostenlos starten →