Comparative Study on Distortion Evaluation Methods for Seismic Simulation Vibration Table
Journal of Civil Engineering and Urban Planning · 2026 · 8 (1)
DOI: 10.23977/jceup.2026.080119 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Civil Engineering and Urban Planning, 2026.
Abstract (Originalsprache)
: To address the inconsistency in distortion definitions for seismic simulation shaking tables, a comparative study was carried out on three distortion indices, namely the fundamental-referenced total harmonic distortion, the rms-referenced distortion, and the peak distortion, based on measured sinusoidal response data from a 2.4 m × 2.4 m biaxial seismic simulation shaking table. The results indicate that the fundamental-referenced total harmonic distortion and the rms-referenced distortion exhibit similar trends within the low-to-moderate distortion range, whereas the former has a clearer physical meaning and is more suitable as the primary index for evaluating sinusoidal waveform quality. The peak distortion is more sensitive to local abnormal spectral peaks and can therefore be used as a supplementary diagnostic index.
Zitieren
APA
(2026). Comparative Study on Distortion Evaluation Methods for Seismic Simulation Vibration Table. Journal of Civil Engineering and Urban Planning, 8(1). https://doi.org/10.23977/jceup.2026.080119
Vancouver
Comparative Study on Distortion Evaluation Methods for Seismic Simulation Vibration Table. Journal of Civil Engineering and Urban Planning. 2026;8(1). doi:10.23977/jceup.2026.080119
BibTeX
@article{euvimed2026,
title = {Comparative Study on Distortion Evaluation Methods for Seismic Simulation Vibration Table},
journal = {Journal of Civil Engineering and Urban Planning},
year = {2026},
volume = {8},
number = {1},
doi = {10.23977/jceup.2026.080119}
}
EUVIMED