EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Unjuk Kerja Mesin Perajang Biomassa Tipe Slicer untuk Perajangan Pelepah Kelapa Sawit

Galang Dzakwan Hafizh, Sandi Asmara, Oktafri Oktafri, Siti Suharyatun

Jurnal Agricultural Biosystem Engineering · 20.03.2026 · 5 (1) · 10-16

DOI: 10.23960/jabe.v5i1.12376 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Agricultural Biosystem Engineering, online erschienen am 20.03.2026. Verfasst von Galang Dzakwan Hafizh und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to evaluate the performance of a slicer-type biomass chopper in processing oil palm fronds at different engine speeds (2000, 2350, and 2700 rpm). The observed parameters included working capacity, fuel consumption, material losses, and ergonomic aspects. The results showed that variations in engine speed significantly affected machine performance. The highest working capacity was achieved at 2700 rpm, reaching 465.96 kg/h, while the lowest was at 2000 rpm with 185.04 kg/h. Fuel consumption ranged from 1.29 to 1.70 L/h, with the lowest value at 2000 rpm and the highest at 2700 rpm. The lowest material loss was recorded at 2000 rpm (0.95%), whereas the highest occurred at 2700 rpm (2.44%). Ergonomic analysis indicated that the Cardiovascular Load (CVL) ranged from 31% to 36%, categorized as moderate workload and still tolerable for operators. Overall, the best performance was obtained at 2700 rpm due to its highest working capacity with relatively acceptable losses.

Zitieren

APA

Hafizh, G. D., Asmara, S., Oktafri, O., & Suharyatun, S. (2026). Unjuk Kerja Mesin Perajang Biomassa Tipe Slicer untuk Perajangan Pelepah Kelapa Sawit. Jurnal Agricultural Biosystem Engineering, 5(1), 10-16. https://doi.org/10.23960/jabe.v5i1.12376

Vancouver

Hafizh GD, Asmara S, Oktafri O, Suharyatun S. Unjuk Kerja Mesin Perajang Biomassa Tipe Slicer untuk Perajangan Pelepah Kelapa Sawit. Jurnal Agricultural Biosystem Engineering. 2026;5(1):10-16. doi:10.23960/jabe.v5i1.12376

BibTeX
@article{Hafizh2026,
  author = {Hafizh, Galang Dzakwan and Asmara, Sandi and Oktafri, Oktafri and Suharyatun, Siti},
  title = {Unjuk Kerja Mesin Perajang Biomassa Tipe Slicer untuk Perajangan Pelepah Kelapa Sawit},
  journal = {Jurnal Agricultural Biosystem Engineering},
  year = {2026},
  volume = {5},
  number = {1},
  pages = {10--16},
  doi = {10.23960/jabe.v5i1.12376}
}
Kostenlos starten →