EUVIMEDEUVIMED entdecken
Crossref

A MATHEMATICAL MODEL OF THE TRANSIENT THERMAL STATE OF A MACHINE TOOL BALL SCREW SHAFT

Volodymyr Korenkov, Taras Skrypnyk

Ukrainian Journal of Mechanical Engineering and Materials Science · 2026 · 12 (3) · 88-99

DOI: 10.23939/ujmems2026.03.088 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ukrainian Journal of Mechanical Engineering and Materials Science, 2026. Verfasst von Volodymyr Korenkov und 1 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The accuracy of precision machining centers depends significantly on the thermal state of the ball screw, which is responsible for 40-70% of the total positioning error. During operation of the machine tool feed axis, the temperature field of the ball screw is formed under the influence of several simultaneous heat generation sources and heat dissipation paths, which complicates the development of a coherent model of its transient thermal state. The objective of this work is to develop an analytical model of the transient thermal state of the ball screw shaft that includes the main thermal effects during machine tool operation. To this end, the screw shaft is modeled as a one-dimensional rod, and its temperature field is described by a heat-conduction boundary-value problem with distributed, concentrated, and moving thermal loads. The model includes axial heat conduction, convective heat transfer from the lateral surface to the ambient air, moving localized heat generation in the nut region, localized heat dissipation through the nut, as well as boundary heat balances at the screw end faces that comprise heat generation in the bearings, heat dissipation through the bearing supports into the machine bed, and heat exchange with the electric motor. A combined model of the screw-air convective heat transfer coefficient is proposed, suitable for time-varying temperatures and rotational speeds. Analytical expressions for heat generation in the nut and bearings are given, with friction torques expressed as functions of rotational speed, preload, and lubricant viscosity. The least well-defined parameters of the model are the heat dissipation coefficients through the bearing supports, the nut, and the motor-screw connection, which generally require experimental calibration for a specific machine tool. The proposed model can be used as a physics-based basis for the subsequent calculation of thermal elongation of the screw and the design of thermal error compensation systems.

Zitieren

APA

Korenkov, V., & Skrypnyk, T. (2026). A MATHEMATICAL MODEL OF THE TRANSIENT THERMAL STATE OF A MACHINE TOOL BALL SCREW SHAFT. Ukrainian Journal of Mechanical Engineering and Materials Science, 12(3), 88-99. https://doi.org/10.23939/ujmems2026.03.088

Vancouver

Korenkov V, Skrypnyk T. A MATHEMATICAL MODEL OF THE TRANSIENT THERMAL STATE OF A MACHINE TOOL BALL SCREW SHAFT. Ukrainian Journal of Mechanical Engineering and Materials Science. 2026;12(3):88-99. doi:10.23939/ujmems2026.03.088

BibTeX
@article{Korenkov2026,
  author = {Korenkov, Volodymyr and Skrypnyk, Taras},
  title = {A MATHEMATICAL MODEL OF THE TRANSIENT THERMAL STATE OF A MACHINE TOOL BALL SCREW SHAFT},
  journal = {Ukrainian Journal of Mechanical Engineering and Materials Science},
  year = {2026},
  volume = {12},
  number = {3},
  pages = {88--99},
  doi = {10.23939/ujmems2026.03.088}
}
Kostenlos starten →