RESULTS AND ANALYSIS OF EXPERIMENTAL STUDIES OF A TWO-SUPPORT NON-CONTACT PNEUMATIC SPINDLE ON ADJUSTABLE CONICAL AEROSTATIC SUPPORTS
Ukrainian Journal of Mechanical Engineering and Materials Science · 2026 · 12 (3) · 57-66
DOI: 10.23939/ujmems2026.03.057 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ukrainian Journal of Mechanical Engineering and Materials Science, 2026. Verfasst von Oleksii Breshev und 4 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben.
Abstract (Originalsprache)
Problem Statement. Non-contact pneumatic spindles supported by aerostatic bearings are widely used in high-precision manufacturing systems because of their low friction, high rotational accuracy, and reduced wear. However, traditional bearing systems have limited adaptability to changing operating conditions and often demonstrate insufficient load-carrying capacity, stiffness, and energy efficiency. Therefore, the development and validation of adjustable conical aerostatic bearing systems that can improve both static and dynamic characteristics remain important engineering problems.
Objective
The objective of this study is to experimentally investigate the static and high-speed characteristics of a two-support non-contact pneumatic spindle mounted on adjustable tapered aerostatic bearings, as well as to verify the adequacy of the developed analytical and numerical models. Methodology. A prototype of a pneumatic spindle equipped with adjustable conical aerostatic bearings of various geometries was designed and fabricated. An experimental test bench and methodology for full-scale testing were developed. Statistical methods were applied to process the experimental data and determine the trust intervals for the measured parameters. The load-bearing capacity, stiffness, airflow rate, and high-speed performance characteristics of the spindle were investigated at various supply pressures, bearing clearances, and rotational speeds. The experimental results were compared with analytical calculations and CFD simulations based on the finite element method (FEM).
Conclusions
The experimental studies demonstrated a close agreement between the theoretical predictions and measured data. The discrepancy between the theoretical and experimental values of the radial lift force did not exceed 5–7%, whereas the difference for the axial lift force remained within 10%. The results confirmed that adjustable conical aerostatic bearings ensure stable operation over a wide range of operating conditions. An increase in the rotational speed generated an additional aerodynamic lubrication wedge effect, leading to a noticeable increase in the load-carrying capacity. It was found that air consumption increased under load due to pressure redistribution and lubricant overflow in the bearing clearances. Originality. The novelty of this study lies in the development and experimental validation of a pneumatic spindle based on adjustable conical aerostatic bearings with variable geometry, as well as a complex methodology for evaluating their static and dynamic characteristics. This study also confirms the suitability of combined analytical and numerical approaches for predicting bearing characteristics. Practical value. The proposed bearing system allows the spindle characteristics to be adapted to specific operating conditions, reduces compressed air consumption, and increases the efficiency, reliability, and accuracy of noncontact drive systems. Scopes of Further Investigations. Further research should focus on optimizing the bearing geometry, investigating the rotor's dynamic stability at extremely high rotational speeds, and developing advanced control strategies to adaptively adjust bearing clearances under variable load conditions.
Zitieren
APA
Breshev, O., Nosko, P., Bashta, O., Heletiy, V., & Bashta, A. (2026). RESULTS AND ANALYSIS OF EXPERIMENTAL STUDIES OF A TWO-SUPPORT NON-CONTACT PNEUMATIC SPINDLE ON ADJUSTABLE CONICAL AEROSTATIC SUPPORTS. Ukrainian Journal of Mechanical Engineering and Materials Science, 12(3), 57-66. https://doi.org/10.23939/ujmems2026.03.057
Vancouver
Breshev O, Nosko P, Bashta O, Heletiy V, Bashta A. RESULTS AND ANALYSIS OF EXPERIMENTAL STUDIES OF A TWO-SUPPORT NON-CONTACT PNEUMATIC SPINDLE ON ADJUSTABLE CONICAL AEROSTATIC SUPPORTS. Ukrainian Journal of Mechanical Engineering and Materials Science. 2026;12(3):57-66. doi:10.23939/ujmems2026.03.057
BibTeX
@article{Breshev2026,
author = {Breshev, Oleksii and Nosko, Pavlo and Bashta, Oleksandr and Heletiy, Volodymyr and Bashta, Alla},
title = {RESULTS AND ANALYSIS OF EXPERIMENTAL STUDIES OF A TWO-SUPPORT NON-CONTACT PNEUMATIC SPINDLE ON ADJUSTABLE CONICAL AEROSTATIC SUPPORTS},
journal = {Ukrainian Journal of Mechanical Engineering and Materials Science},
year = {2026},
volume = {12},
number = {3},
pages = {57--66},
doi = {10.23939/ujmems2026.03.057}
}
EUVIMED