EUVIMEDEUVIMED entdecken
Crossref

MATHEMATICAL MODELING OF WELDED JOINT DYNAMIC DEFORMATION UNDER VIBRO-IMPACT LOADING

Andrii Slabkyi, Dmytro Bakalets, Vladyslav Polishchuk

Ukrainian Journal of Mechanical Engineering and Materials Science · 2026 · 12 (3) · 1-9

DOI: 10.23939/ujmems2026.03.001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ukrainian Journal of Mechanical Engineering and Materials Science, 2026. Verfasst von Andrii Slabkyi und 2 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mitigating residual welding stresses using conventional post-weld heat treatment (PWHT) methods entails high energy consumption and risks of surface scaling, thermal distortion, and undesirable coarsening of strengthening precipitate phases. Conventional low-frequency vibratory stress relief (VSR) based on electromechanical unbalance exciters is ineffective for heavy- section (δ ≥ 20 mm) or rigidly clamped joints, as it requires large macroscopic bending deflections that may induce premature fatigue failure. The purpose of this study is to develop a comprehensive calculation procedure and a three-dimensional mathematical continuum model for the dynamic deformation of a welded joint subjected to hydro-pulse vibro-impact loading, enabling analytical prediction of residual stress relaxation kinetics. The thermal welding cycle, structural-phase transformations, oscillatory motion, and microplastic strain accumulation are modeled as an interconnected multi-field continuum system. The mathematical formulation links Fourier heat conduction with Goldak’s double-ellipsoid source, solid-state phase-transformation dilatation, transformation-induced plasticity (TRIP), the equation of dynamic motion with an initial stress stiffness matrix, Hunt – Crossley contact mechanics, and Kwofie’s cyclic plasticity formulation. It is shown that peak stress relaxation decays exponentially towards a saturated threshold. Numerical verification performed for a circumferential butt-welded tubular joint (∅114×7 mm, St3kp structural steel) confirmed that resonant vibro-impact loading (135 Hz frequency, 2.94 kN driving force amplitude, 2.8 m/s impact velocity) produces a residual stress reduction of 71 MPa (32.8 %) within 15–25 s without degrading the base metal’s fatigue capacity. For the first time, an advanced continuum model combines the initial three-dimensional welding residual stress tensor, obtained via a geometric stress-stiffness matrix, with the non-linear wave contact mechanics generated by an impact striker in a hydro-pulse mechanism. The established analytical relationships form an engineering framework for designing hydro-pulse stress-relief equipment, enabling the calculation of operating pressure, striker mass, contact velocity, pulse frequency, and treatment duration. Experimental validation of the predicted relaxation kinetics on full-scale tubular specimens using hole-drilling strain gauge methods and X-ray diffraction techniques.

Zitieren

APA

Slabkyi, A., Bakalets, D., & Polishchuk, V. (2026). MATHEMATICAL MODELING OF WELDED JOINT DYNAMIC DEFORMATION UNDER VIBRO-IMPACT LOADING. Ukrainian Journal of Mechanical Engineering and Materials Science, 12(3), 1-9. https://doi.org/10.23939/ujmems2026.03.001

Vancouver

Slabkyi A, Bakalets D, Polishchuk V. MATHEMATICAL MODELING OF WELDED JOINT DYNAMIC DEFORMATION UNDER VIBRO-IMPACT LOADING. Ukrainian Journal of Mechanical Engineering and Materials Science. 2026;12(3):1-9. doi:10.23939/ujmems2026.03.001

BibTeX
@article{Slabkyi2026,
  author = {Slabkyi, Andrii and Bakalets, Dmytro and Polishchuk, Vladyslav},
  title = {MATHEMATICAL MODELING OF WELDED JOINT DYNAMIC DEFORMATION UNDER VIBRO-IMPACT LOADING},
  journal = {Ukrainian Journal of Mechanical Engineering and Materials Science},
  year = {2026},
  volume = {12},
  number = {3},
  pages = {1--9},
  doi = {10.23939/ujmems2026.03.001}
}
Kostenlos starten →