EUVIMEDEUVIMED entdecken
Crossref

FORCE ANALYSIS AND ACTUATION EFFORT ESTIMATION OF A ONE-HANDED MECHANISM FOR MANUAL CONTROL OF THREE MOTOR-VEHICLE PEDALS

Vitaliy Korendiy, Nazarii Fedunyshyn, Viacheslav Pasika, Nataliya Hembara, Anna Pokhmurska

Ukrainian Journal of Mechanical Engineering and Materials Science · 2026 · 12 (2) · 62-81

DOI: 10.23939/ujmems2026.02.062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ukrainian Journal of Mechanical Engineering and Materials Science, 2026. Verfasst von Vitaliy Korendiy und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Problem statement. The development of adaptive driving systems for persons with limited lower-limb mobility remains an important engineering problem, especially for vehicles equipped with manual transmissions. Most available hand-operated driving aids are intended only for accelerator and brake control, whereas coordinated operation of the accelerator, brake, and clutch requires a more complex mechanical transmission system. A previously proposed multi-link hinge-lever device enables one-handed control of three vehicle pedals; however, its practical implementation requires a detailed assessment of the transmitted loads, driver-applied forces, and the most heavily loaded structural elements.

Purpose

The objective of this paper is to develop and substantiate a quasi-static force-analysis procedure for an improved hinge-lever system designed for one-handed operation of accelerator, brake, and clutch functions. The study aims to determine the resisting moments of the driven pedal links, axial loads in the push-pull rods, generalized control loads, hand-force components, and the influence of centering spring stiffness on the required driver effort. Methodology. The proposed approach combines the previously developed kinematic model with static equilibrium equations, the principle of virtual work, and Jacobian-based force transformation. The motion of the system is described by two generalized coordinates: the angular displacement of the control lever and the linear displacement of the slider from its neutral position. The pedal resistance is represented by equivalent moment-angle models, while the rods are treated as two-force members that transmit axial tension or compression. The numerical implementation includes calculating instantaneous force-transmission arms, axial rod forces, generalized loads, tangential and axial hand-force components, and the resultant driver-applied force for several operating regimes.

Findings

The numerical results show that the accelerator subsystem has the lowest resistance and axial rod load, whereas the brake subsystem is the most critical. The adopted service-braking model yields a brake resisting moment of approximately 8.0–69.0 N·m, while the emergency-braking moment may reach approximately 98.7 N·m. The calculated force-transmission arms remain sufficiently far from zero, indicating the absence of near-singular configurations within the considered operating range. The brake rod axial load reaches approximately 251.3 N, while the resultant driver-applied hand force reaches approximately 235.1 N for the baseline equivalent centering spring stiffness of 0.20 N/mm. Increasing this stiffness from 0.10 to 0.30 N/mm raises the maximum axial hand-force component from approximately 208.7 N to 254.7 N. Originality. The novelty of the study lies in extending the kinematic model of a one-handed three-pedal driving aid with a force-transmission formulation that simultaneously accounts for pedal-resisting moments, axial loads in push-pull rods, centering spring forces, generalized loads, and driver-applied hand-force components. Unlike most existing studies and patented solutions focused mainly on structural layouts or two-pedal hand controls, the proposed procedure is oriented toward evaluating the load state of a three-function adaptive linkage. Practical value. The results obtained can be used to select rational geometric parameters of the linkage, estimate the required driver effort, choose the centering spring stiffness, check the strength of the rods and spherical joints, and identify the most heavily loaded components of the system. The brake rod, slider, guide, and corresponding joints are shown to require the highest safety margin. The proposed calculation procedure may support the further design, optimization, and vehicle-specific adaptation of hand-operated driving devices. Scopes of further investigations. Future research should focus on experimental identification of real force-displacement characteristics of accelerator, brake, and clutch pedals for a selected vehicle, manufacturing and testing a full-scale prototype, measuring the actual hand-force components during operation, and refining the model by accounting for friction, joint clearances, elastic deformations, nonlinear clutch resistance, and dynamic effects.

Zitieren

APA

Korendiy, V., Fedunyshyn, N., Pasika, V., Hembara, N., & Pokhmurska, A. (2026). FORCE ANALYSIS AND ACTUATION EFFORT ESTIMATION OF A ONE-HANDED MECHANISM FOR MANUAL CONTROL OF THREE MOTOR-VEHICLE PEDALS. Ukrainian Journal of Mechanical Engineering and Materials Science, 12(2), 62-81. https://doi.org/10.23939/ujmems2026.02.062

Vancouver

Korendiy V, Fedunyshyn N, Pasika V, Hembara N, Pokhmurska A. FORCE ANALYSIS AND ACTUATION EFFORT ESTIMATION OF A ONE-HANDED MECHANISM FOR MANUAL CONTROL OF THREE MOTOR-VEHICLE PEDALS. Ukrainian Journal of Mechanical Engineering and Materials Science. 2026;12(2):62-81. doi:10.23939/ujmems2026.02.062

BibTeX
@article{Korendiy2026,
  author = {Korendiy, Vitaliy and Fedunyshyn, Nazarii and Pasika, Viacheslav and Hembara, Nataliya and Pokhmurska, Anna},
  title = {FORCE ANALYSIS AND ACTUATION EFFORT ESTIMATION OF A ONE-HANDED MECHANISM FOR MANUAL CONTROL OF THREE MOTOR-VEHICLE PEDALS},
  journal = {Ukrainian Journal of Mechanical Engineering and Materials Science},
  year = {2026},
  volume = {12},
  number = {2},
  pages = {62--81},
  doi = {10.23939/ujmems2026.02.062}
}
Kostenlos starten →