DYNAMIC MODELING OF A PASSIVELY ADAPTIVE IN-PIPE ROBOT WITH INCHWORM LOCOMOTION
Ukrainian Journal of Mechanical Engineering and Materials Science · 2026 · 12 (1) · 50-66
DOI: 10.23939/ujmems2026.01.050 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ukrainian Journal of Mechanical Engineering and Materials Science, 2026. Verfasst von Vitaliy Korendiy und 5 weiteren Autor:innen.
Abstract (Originalsprache)
Problem statement. The structural integrity of pipeline networks requires continuous non-destructive inspection, increasingly performed by in-pipe robots to prevent hazardous leakages. Despite substantial advancements in modular hybrid platforms, a persistent analytical gap exists. There is a distinct lack of a unifying mathematical framework that bridges desired kinematic profiles with the complex, time-varying forces in multi-contact, piecewise-continuous propulsion mechanisms.
Purpose
This study aims to develop a comprehensive kinetostatic and hybrid dynamic model for the propulsion system of a novel passively adaptive wall-press in-pipe robot utilizing a single-actuator inchworm locomotion strategy. Methodology. The conceptual architecture comprises a symmetrical, two-module robot featuring a spring-loaded pantograph mechanism for passive centering and a slider-crank mechanism combined with freewheel clutches for propulsion. A 2D equivalent kinematic scheme was formulated. Piecewise-continuous equations of motion were derived utilizing the second-kind Lagrange equations to establish effective inertia, centrifugal terms, and generalized forces. To analyze transient dynamics and rigid impact loads, numerical simulations were executed using Wolfram Mathematica, employing a “StiffnessSwitching” algorithm to accurately resolve non-smooth state-dependent transitions.
Findings
The numerical results successfully validated the proposed locomotion strategy, proving that high-frequency internal reciprocating oscillations are efficiently rectified into stable, unidirectional, “staircase” macroscopic progression. The analysis verified that the modules advance strictly sequentially without simultaneous non-zero velocities, effectively acting as ideal mechanical diodes. Concurrently, the rigorous dynamic evaluation revealed extreme transient acceleration spikes approaching ±1000 m/s² resulting from the instantaneous engagement of rigid overrunning clutches at phase boundaries. Originality. The primary novelty lies in synthesizing a unified hybrid mathematical model for a single-actuator inchworm robot that explicitly captures the transient dynamics, alternating shift of inertial masses, and instantaneous switching of external resistive loads during the locomotion cycle. Practical value. The formulated kinetostatic approach provides a rigorous analytical tool for the design optimization and model-oriented control of in-pipe robots. It critically highlights that constructing a physical prototype strictly based on perfectly rigid linkages and standard non-compliant freewheels will inevitably lead to catastrophic structural failure due to severe inertial shock loads. Scopes of further investigations. Future research and physical prototyping must focus on introducing engineered mechanical compliance into the kinematic chain to prevent structural failure. This includes incorporating torsional compliance in the transmission system and utilizing compliant clutch mechanisms to ensure shock absorption and operational longevity.
Zitieren
APA
Korendiy, V., Gurey, V., Zelinskyi, M., Heletiy, V., Lanets, O., & Protasov, R. (2026). DYNAMIC MODELING OF A PASSIVELY ADAPTIVE IN-PIPE ROBOT WITH INCHWORM LOCOMOTION. Ukrainian Journal of Mechanical Engineering and Materials Science, 12(1), 50-66. https://doi.org/10.23939/ujmems2026.01.050
Vancouver
Korendiy V, Gurey V, Zelinskyi M, Heletiy V, Lanets O, Protasov R. DYNAMIC MODELING OF A PASSIVELY ADAPTIVE IN-PIPE ROBOT WITH INCHWORM LOCOMOTION. Ukrainian Journal of Mechanical Engineering and Materials Science. 2026;12(1):50-66. doi:10.23939/ujmems2026.01.050
BibTeX
@article{Korendiy2026,
author = {Korendiy, Vitaliy and Gurey, Volodymyr and Zelinskyi, Maksym-Pavlo and Heletiy, Volodymyr and Lanets, Olena and Protasov, Roman},
title = {DYNAMIC MODELING OF A PASSIVELY ADAPTIVE IN-PIPE ROBOT WITH INCHWORM LOCOMOTION},
journal = {Ukrainian Journal of Mechanical Engineering and Materials Science},
year = {2026},
volume = {12},
number = {1},
pages = {50--66},
doi = {10.23939/ujmems2026.01.050}
}
EUVIMED