Influence of dynamic vibration damper in a dual-mass flywheel on the load of vehicle transmission links
Transport technologies · 08.06.2026 · 7 (1) · 90-98
DOI: 10.23939/tt2026.01.090 ↗Kurz gefasst
Fachartikel in der Zeitschrift Transport technologies, online erschienen am 08.06.2026. Verfasst von Bohdan Kindratskyy und 1 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben.
Abstract (Originalsprache)
Dual-mass flywheels (DMFs) are designed to absorb torque fluctuations generated by an internal combustion engine (ICE) and protect transmission links from overload. However, absorbing torque fluctuations from the ICE, their elastic elements are subjected to intense cyclic loading. In this regard, we hypothesized the possibility of reducing the impact of torque fluctuations of the ICE on the drive links and elastic elements of the DMF by using a dynamic vibration damper mounted in the secondary mass of the DMF. Based on the dynamic model of the vehicle drive with an ICE and DMF, as well as with a DMF equipped with a dynamic vibration damper (DVD), a simulation model of the vehicle drive during idling has been developed in the MatLab Simulink environment. The influence of the DVD mounted on the secondary mass of the DMM on vibration processes in the links of the DMF and on the transmission of a car at idle speed of the ICE at different crankshaft rotation frequencies was investigated. It has been established that a DVD with a small moment of inertia relative to the axis of rotation of the ICE engine shaft, with the correct selection of its moment of inertia and the stiffness of the elastic elements with which it is attached to the secondary mass of the DMF, significantly affects the vibration processes in the vehicle transmission compared to the DMF without a DVD. Appropriate adjustment of the natural frequency of oscillations of the DVD and its coordination with the frequency of oscillations of the ICE stabilizes the amplitude of vibrations in the elastic links of the DMF and, as a result, in the gearbox links. The effective vibration absorption of DMF with a DVD increases significantly compared to DMF without a DVD, thereby reducing the influence of cyclic loads on the drive links and elastic elements of the DVD. With an increase in the frequency of rotation of the ICE crankshaft, the amplitude of stress fluctuations in the elastic elements of the DMF decreases.
Zitieren
APA
Kindratskyy, B., & Litvin, R. (2026). Influence of dynamic vibration damper in a dual-mass flywheel on the load of vehicle transmission links. Transport technologies, 7(1), 90-98. https://doi.org/10.23939/tt2026.01.090
Vancouver
Kindratskyy B, Litvin R. Influence of dynamic vibration damper in a dual-mass flywheel on the load of vehicle transmission links. Transport technologies. 2026;7(1):90-98. doi:10.23939/tt2026.01.090
BibTeX
@article{Kindratskyy2026,
author = {Kindratskyy, Bohdan and Litvin, Roman},
title = {Influence of dynamic vibration damper in a dual-mass flywheel on the load of vehicle transmission links},
journal = {Transport technologies},
year = {2026},
volume = {7},
number = {1},
pages = {90--98},
doi = {10.23939/tt2026.01.090}
}
EUVIMED