DEVELOPMENT OF AN ELECTRONIC IGNITION SYSTEM BASED ON THE STM32F746ZG MICROCONTROLLER WITH A PROGRAMMABLE SLG47105V DRIVER
Infocommunication technologies and electronic engineering · 2026-11 · 6 (2) · 174-182
DOI: 10.23939/ictee2026.02.174 ↗Kurz gefasst
Fachartikel in der Zeitschrift Infocommunication technologies and electronic engineering, 2026-10. Verfasst von Olha Shymchyshyn und 1 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben.
Abstract (Originalsprache)
This paper presents the results of the development and experimental study of an electronic ignition system for a four-cylinder internal combustion engine based on the high-performance STM32F746ZG microcontroller. The relevance of this work is driven by the need to improve the accuracy of ignition timing, ensure flexible system parameter adjustment, and reduce the cost of electronic control units for internal combustion engines. The proposed system is built on a modular principle and includes an FC-03 optical crankshaft position sensor, a throttle position sensor, a GreenPAK SLG47105V programmable mixed-signal matrix, IRF630N power MOSFETs, as well as ignition coils and spark plugs. A key feature of the developed technical solution is the use of the SLG47105V chip as a programmable intermediate driver for power switches, which ensures the generation of energy accumulation pulses of the required duration, provides protection for power switches, and allows for dynamic adjustment of operational parameters via an I²C interface. An ignition timing control algorithm has been developed based on the analysis of crankshaft position sensor signals and the determination of the engine operating mode via the throttle position. The selection of the ignition advance angle is performed using a 16×16 two-dimensional control map that takes into account engine speed and load. The power section of the system has been calculated and designed, the parameters for energy accumulation in the primary winding of the ignition coil have been determined, and the component base selection has been justified. The results of experimental studies have confirmed the correct operation of the synchronization and control algorithms, as well as stable generation of ignition pulses for all four channels. It is shown that the system provides stable operation in the speed range from 500 to 8000 rpm with a control pulse generation instability of no more than ±2 µs. The study of the current waveform in the primary winding of the ignition coil confirmed the achievement of the required energy accumulation level within 3 ms and the efficiency of the proposed architecture. The obtained results demonstrate the potential for using the developed system as a basis for building microcontroller-based electronic control units for internal combustion engines of various configurations.
Zitieren
APA
Shymchyshyn, O., & Kaba, M. (2026). DEVELOPMENT OF AN ELECTRONIC IGNITION SYSTEM BASED ON THE STM32F746ZG MICROCONTROLLER WITH A PROGRAMMABLE SLG47105V DRIVER. Infocommunication technologies and electronic engineering, 6(2), 174-182. https://doi.org/10.23939/ictee2026.02.174
Vancouver
Shymchyshyn O, Kaba M. DEVELOPMENT OF AN ELECTRONIC IGNITION SYSTEM BASED ON THE STM32F746ZG MICROCONTROLLER WITH A PROGRAMMABLE SLG47105V DRIVER. Infocommunication technologies and electronic engineering. 2026;6(2):174-182. doi:10.23939/ictee2026.02.174
BibTeX
@article{Shymchyshyn2026,
author = {Shymchyshyn, Olha and Kaba, Mykhailo},
title = {DEVELOPMENT OF AN ELECTRONIC IGNITION SYSTEM BASED ON THE STM32F746ZG MICROCONTROLLER WITH A PROGRAMMABLE SLG47105V DRIVER},
journal = {Infocommunication technologies and electronic engineering},
year = {2026},
volume = {6},
number = {2},
pages = {174--182},
doi = {10.23939/ictee2026.02.174}
}
EUVIMED