GEOMETRY OPTIMIZATION OF A QUADRIFILAR LOOP ANTENNA FOR ELECTRONIC WARFARE SYSTEMS (PART 1)
Infocommunication technologies and electronic engineering · 2026-11 · 6 (2) · 118-132
DOI: 10.23939/ictee2026.02.118 ↗Kurz gefasst
Fachartikel in der Zeitschrift Infocommunication technologies and electronic engineering, 2026-10. Verfasst von Ivan Bokhan und 4 weiteren Autor:innen. Die Arbeit nennt 10 Literaturangaben.
Abstract (Originalsprache)
The paper presents the results of a parametric analysis of the geometry of a single-port quadrifilar loop antenna (QLA), structural analogues of which are used in commercial products for electronic warfare systems. The aim of the work is a parametric study of the influence of the geometric parameters of the quadrifilar loop antenna on its electrodynamic characteristics in order to substantiate a rational configuration for countering unmanned aerial vehicles. The relevance of the study is determined by the need for a justified selection of QLA element dimensions when scaling the structure to different operating frequency bands, taking into account the requirements for broadband operation, impedance matching, the level of backward radiation, and coverage of the upper hemisphere. Based on electromagnetic simulation in Ansys HFSS, the influence of the strip conductor width, antenna height, and feed-gap size on the reflection coefficient, VSWR, input impedance, main-lobe width of the radiation pattern, back-lobe level, and axial ratio of the polarization ellipse was analyzed. It is shown that the investigated configuration produces a cardioid radiation pattern with a tent- or dome-shaped form, intended for operation in the upper-hemisphere sector, which is important for dome-type and trench electronic warfare systems. It has been established that changes in the geometric parameters can improve matching conditions and expand the operating frequency band, but at the same time affect the stability of circular polarization and the shape of the radiation pattern. Therefore, the obtained results are considered as an assessment of the trade-off between bandwidth, polarization characteristics, backward-radiation level, and technological repeatability of the structure. The obtained dependencies can be used to select rational geometric parameters of the QLA during the practical adaptation and scaling of known design solutions for different frequency bands of UAV countermeasure systems. Special attention is paid to assessing the sensitivity of the antenna characteristics to dimensional changes.
Zitieren
APA
Bokhan, I., Lykhograi, V., Gavva, D., Bielousov, O., & Gretskih, D. (2026). GEOMETRY OPTIMIZATION OF A QUADRIFILAR LOOP ANTENNA FOR ELECTRONIC WARFARE SYSTEMS (PART 1). Infocommunication technologies and electronic engineering, 6(2), 118-132. https://doi.org/10.23939/ictee2026.02.118
Vancouver
Bokhan I, Lykhograi V, Gavva D, Bielousov O, Gretskih D. GEOMETRY OPTIMIZATION OF A QUADRIFILAR LOOP ANTENNA FOR ELECTRONIC WARFARE SYSTEMS (PART 1). Infocommunication technologies and electronic engineering. 2026;6(2):118-132. doi:10.23939/ictee2026.02.118
BibTeX
@article{Bokhan2026,
author = {Bokhan, Ivan and Lykhograi, V. and Gavva, D. and Bielousov, O. and Gretskih, D.},
title = {GEOMETRY OPTIMIZATION OF A QUADRIFILAR LOOP ANTENNA FOR ELECTRONIC WARFARE SYSTEMS (PART 1)},
journal = {Infocommunication technologies and electronic engineering},
year = {2026},
volume = {6},
number = {2},
pages = {118--132},
doi = {10.23939/ictee2026.02.118}
}
EUVIMED