The Role of the Laminar Boundary Layer in the Formation of the Overall Heat Transfer Coefficient and Its Analytical Calculation
Chemistry & Chemical Technology · 25.10.2026 · 20 (3) · 535-552
DOI: 10.23939/chcht20.03.535 ↗Kurz gefasst
Fachartikel in der Zeitschrift Chemistry & Chemical Technology, online erschienen am 29.10.2026. Verfasst von Yuriy Bilonoga und 5 weiteren Autor:innen.
Abstract (Originalsprache)
This study compared the classical method of calculating heat exchange equipment using the classical similarity numbers Nusselt, Reynolds, and Prandtl with a new method based on taking into account the surface tension coefficient of heat carriers, their transient, turbulent viscosity, and thermal conductivity, as well as the average thickness of the laminar boundary layer (LBL). The classical method turns out to be completely insensitive to the use of nanofluids in heat carriers (water, ethylene and propylene glycols) and therefore the calculation by this method requires the improvement of classical numerical equations in accordance with the change in their qualitative and quantitative composition. A new formula has been derived for calculating the average thickness of the LBL at T of the coolant flow regime, which correlates well with the classical ones, but has its own advantages. We divided the cross section of the fluid flow into the LBL with an average thickness, where the Fourier heat conduction equation is used, and also into its turbulent part, where not the classical Newton equation with the heat transfer coefficient is used, but the heat conduction equation with turbulent heat conduction and new similarity numbers Bl and Blturb, which we presented in previous works. The examples show the effectiveness of the new method for calculating the heat transfer coefficient using the cubic numerical equation derived by us in the previous work. The sensitivity analysis of the classical numerical equations, as well as the proposed cubic equation, with respect to the turbulent viscosity and thermal conductivity of the central part of the coolant flow to the use of nanofluid additives in base fluids is performed, which shows the maximum advantage of the new method. The key role of the LBL in the formation of the total thermal resistance in the heat transfer system in recuperative heat exchangers is shown.
Zitieren
APA
Bilonoga, Y., Parubchak, I., Dutsyak, I., Drachuk, U., Musiі, L., & Romashko, I. (2026). The Role of the Laminar Boundary Layer in the Formation of the Overall Heat Transfer Coefficient and Its Analytical Calculation. Chemistry & Chemical Technology, 20(3), 535-552. https://doi.org/10.23939/chcht20.03.535
Vancouver
Bilonoga Y, Parubchak I, Dutsyak I, Drachuk U, Musiі L, Romashko I. The Role of the Laminar Boundary Layer in the Formation of the Overall Heat Transfer Coefficient and Its Analytical Calculation. Chemistry & Chemical Technology. 2026;20(3):535-552. doi:10.23939/chcht20.03.535
BibTeX
@article{Bilonoga2026,
author = {Bilonoga, Yuriy and Parubchak, Ivan and Dutsyak, Igor and Drachuk, Uliana and Musiі, Liubov and Romashko, Iryna},
title = {The Role of the Laminar Boundary Layer in the Formation of the Overall Heat Transfer Coefficient and Its Analytical Calculation},
journal = {Chemistry & Chemical Technology},
year = {2026},
volume = {20},
number = {3},
pages = {535--552},
doi = {10.23939/chcht20.03.535}
}
EUVIMED