A graphic design method for broadband Doherty power amplifier
China Communications · 2026-02 · 23 (2) · 97-111
DOI: 10.23919/jcc.ja.2022-0822 ↗Kurz gefasst
Fachartikel in der Zeitschrift China Communications, 2026-02. Verfasst von Xiao Feng und 4 weiteren Autor:innen.
Abstract (Originalsprache)
In this article, a graphic design method for broadband Doherty power amplifier (DPA) is proposed based on the basic principle of impedance matching with the help of Smith chart. The proposed graphic method avoids the complex formula derivation in the traditional amplifier circuit design process, and the design process is more simple and intuitive. Besides, it only takes three steps to build the load modulation network (LMN) of two power amplifiers (PA) of the DPA. Besides, a capacitor is used to replace the parasitic parameters of the transistor, and the LMN designed in the two modes is used for exploration and comparison. Further more, the output impedance of the peaking PA is introduced to make the reflection coefficient trajectory on Smith chart low-frequency dispersion so as to expand the bandwidth of the DPA at the output power back-off (OBO) level. It would not affect the performance of DPA in the saturation (SAT) state. In this way, a broadband DPA can be implemented easily. To validate the proposed design method, a broadband DPA operating from 1.9 to 2.6 GHz is designed and measured based on the proposed method. Under the continuous-wave excitation, the fabricated DPA has a 6 dB OBO efficiency of 48%–56% and a SAT efficiency of 64%–73% from 1.75 to 2.45 GHz, and the peak output power is 48.9–49.8 dBm.
Zitieren
APA
Feng, X., Zhijiang, D., Kang, Z., Ruibin, G., & Mingyu, L. (2026). A graphic design method for broadband Doherty power amplifier. China Communications, 23(2), 97-111. https://doi.org/10.23919/jcc.ja.2022-0822
Vancouver
Feng X, Zhijiang D, Kang Z, Ruibin G, Mingyu L. A graphic design method for broadband Doherty power amplifier. China Communications. 2026;23(2):97-111. doi:10.23919/jcc.ja.2022-0822
BibTeX
@article{Feng2026,
author = {Feng, Xiao and Zhijiang, Dai and Kang, Zhong and Ruibin, Gao and Mingyu, Li},
title = {A graphic design method for broadband Doherty power amplifier},
journal = {China Communications},
year = {2026},
volume = {23},
number = {2},
pages = {97--111},
doi = {10.23919/jcc.ja.2022-0822}
}
EUVIMED