Single friction plate clutch design for cars with power of 77 kW and speed of 6000 rpm using finite element method
Applied Research and Smart Technology (ARSTech) · 2020
DOI: 10.23917/arstech.v1i1.33 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Research and Smart Technology (ARSTech), 2020. Verfasst von Agung Setyo Darmawan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A single friction plate clutch is one part of the components in a vehicle that is used to transmit power and rotation from the driveshaft to the driven shaft without slippage. This study aims to compare the results of mathematical calculations with analysis based on finite element methods in the design of a single friction plate clutch such as shaft, spline, friction plate, and spring. The analysis was carried out on the shaft made of S30C, spline made of S30C, friction plates made of steel alloy, and springs made of carbon steel. The component was drawn by Solidworks-17 software and analysed by Abaqus 6.14-5 software based on finite element methods. The study was performed by comparing the sizes of the various elements. A comparison of simulation processes using the stress concept of von-misses was conducted. The results of mathematical calculations with the simulation process were compared, and the maximum deviation was 2.881%. The deviation was considered acceptable. Based on von-misses’ maximum stress, the material was safe to use due to below the yield strength.
Zitieren
APA
Darmawan, A. S., Syarif, J., Purboputro, P. I., Yulianto, A., Hamid, A., & Noviyanto, N. (2020). Single friction plate clutch design for cars with power of 77 kW and speed of 6000 rpm using finite element method. Applied Research and Smart Technology (ARSTech). https://doi.org/10.23917/arstech.v1i1.33
Vancouver
Darmawan AS, Syarif J, Purboputro PI, Yulianto A, Hamid A, Noviyanto N. Single friction plate clutch design for cars with power of 77 kW and speed of 6000 rpm using finite element method. Applied Research and Smart Technology (ARSTech). 2020. doi:10.23917/arstech.v1i1.33
BibTeX
@article{Darmawan2020,
author = {Darmawan, Agung Setyo and Syarif, Junaidi and Purboputro, Pramuko Ilmu and Yulianto, Agus and Hamid, Abdul and Noviyanto, Noviyanto},
title = {Single friction plate clutch design for cars with power of 77 kW and speed of 6000 rpm using finite element method},
journal = {Applied Research and Smart Technology (ARSTech)},
year = {2020},
doi = {10.23917/arstech.v1i1.33}
}
EUVIMED