EUVIMEDEUVIMED entdecken
Crossref

Comparative Study of Sodium and Strontium Modification on the Microstructure and Mechanical Behaviour of Al -Si7Mg0.3 (LM25/A356) Alloy

Bathula Srinivas, G. Ranga Janardhana

Aposta: Revista de Ciencias Sociales · 28.05.2026 · 24 (112) · e893

DOI: 10.23900/ra.v24i112.893 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aposta: Revista de Ciencias Sociales, online erschienen am 28.05.2026. Verfasst von Bathula Srinivas und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the comparative effects of sodium (Na) and strontium (Sr) modification on the microstructure and mechanical properties of LM25 (Al–Si7Mg0.3) aluminium alloy. The alloy was modified with sodium at 2.0–4.0 wt. % and strontium at 0.01–0.05 wt. %. Cast specimens were produced via permanent mould casting under uniform processing conditions to assess the efficacy of both modifiers. Optical microscopy and scanning electron microscopy (SEM) were utilized to examine the development of eutectic silicon morphology and microstructural refinement. Mechanical characterization encompassed ultimate tensile strength (UTS), yield strength (YS), percentage elongation, and impact strength. Measurements of density and porosity were conducted. The experimental findings demonstrated a notable enhancement in the shape of eutectic silicon in both Na and Sr modified alloys relative to the original LM25 alloy. The coarse acicular silicon particles in the original alloy converted into fine fibrous structures upon treatment. Among the examined compositions, Sr modification at 0.04 wt. % demonstrated enhanced performance, yielding the greatest improvements in tensile strength, ductility, and impact resistance. The sodium modification improved the qualities, although the enhancement was rather modest due to a tendency to fade and unstable modification characteristics. The decrease in porosity and increase in density were more significant in the Sr-modified alloy. The research indicates that strontium modification is superior and more industrially dependable than sodium modification for enhancing the microstructure and mechanical properties of LM25 alloy.

Zitieren

APA

Srinivas, B., & Janardhana, G. R. (2026). Comparative Study of Sodium and Strontium Modification on the Microstructure and Mechanical Behaviour of Al -Si7Mg0.3 (LM25/A356) Alloy. Aposta: Revista de Ciencias Sociales, 24(112), e893. https://doi.org/10.23900/ra.v24i112.893

Vancouver

Srinivas B, Janardhana GR. Comparative Study of Sodium and Strontium Modification on the Microstructure and Mechanical Behaviour of Al -Si7Mg0.3 (LM25/A356) Alloy. Aposta: Revista de Ciencias Sociales. 2026;24(112):e893. doi:10.23900/ra.v24i112.893

BibTeX
@article{Srinivas2026,
  author = {Srinivas, Bathula and Janardhana, G. Ranga},
  title = {Comparative Study of Sodium and Strontium Modification on the Microstructure and Mechanical Behaviour of Al -Si7Mg0.3 (LM25/A356) Alloy},
  journal = {Aposta: Revista de Ciencias Sociales},
  year = {2026},
  volume = {24},
  number = {112},
  pages = {e893},
  doi = {10.23900/ra.v24i112.893}
}
Kostenlos starten →