Influence of beam shaping and linear energy on metal mixing, mechanical strength, and microstructure in Al–Cu weld
Journal of Laser Applications · 01.11.2026 · 38 (4)
DOI: 10.2351/7.0002195 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 11.11.2026. Verfasst von Zia Uddin und 3 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Gefördert von: HORIZON EUROPE Marie Sklodowska-Curie Actions.
Abstract (Originalsprache)
Advances in laser beam-shaping (LBS) technologies offer significant benefits for dissimilar metal joining by reducing intermetallic compound (IMC) formation, optimizing weld pool geometry, and controlling weld quality. However, the relationship between beam shaping (BS), melt-pool (MP) dimensions, mechanical strength, intermixing, and phase formation requires further investigation. This study examines the effects of different BS and line energy (EL) on MP geometry, lap-shear joint strength, elemental composition, and possible phase formation in dissimilar Al–Cu overlap welds. We fabricated weld tracks using an nLIGHT Corona system equipped with core-ring beam profiles across a wide range of EL. The results revealed that the core-dominant mode (BSI-0) produced narrow, deeper MP (depth 0.469 mm, width 0.234 mm at E1), whereas the ring-dominant mode (BSI-6) yielded wider, shallower pools (depth 0.371 mm, width 0.382 mm at E1), and intermediate modes produced geometries between these two extremes. The interface width at the top of the copper and bottom of the aluminum exhibited mixed behavior due to the variations in core-to-ring power ratios and peak intensity. Maximum peak breaking force reached 369 N in BSI-0, followed by 334 N in BSI-6; other modes produced lower forces. Elemental analysis confirmed reduced intermixing with increasing ring power ratios due to the decreased peak intensity and limited Cu melting. Overall, EL, BS, and welding speed exhibited combined effects with inherent trade-offs. These findings provide a physical basis for LBS to widen the stable processing window and produce a high-quality Al–Cu weld.
Förderung
- HORIZON EUROPE Marie Sklodowska-Curie Actions
Zitieren
APA
Uddin, Z., Liverani, E., Ascari, A., & Fortunato, A. (2026). Influence of beam shaping and linear energy on metal mixing, mechanical strength, and microstructure in Al–Cu weld. Journal of Laser Applications, 38(4). https://doi.org/10.2351/7.0002195
Vancouver
Uddin Z, Liverani E, Ascari A, Fortunato A. Influence of beam shaping and linear energy on metal mixing, mechanical strength, and microstructure in Al–Cu weld. Journal of Laser Applications. 2026;38(4). doi:10.2351/7.0002195
BibTeX
@article{Uddin2026,
author = {Uddin, Zia and Liverani, Erica and Ascari, Alessandro and Fortunato, Alessandro},
title = {Influence of beam shaping and linear energy on metal mixing, mechanical strength, and microstructure in Al–Cu weld},
journal = {Journal of Laser Applications},
year = {2026},
volume = {38},
number = {4},
doi = {10.2351/7.0002195}
}
EUVIMED